Case Studies

Here are some of our Application Stories and Case Studies that show how our Data Acquisition, Data Communication, Wireless, Controller and SCADA products are being used. You can view the Applications by Industry or by Technology. Click here to see some of our longtime customers.

Applications By Industry
Agriculture
OEM Application summary for agricultural conglomerate using Wincon & Indusoft
Aquaculture
Automotive
Aviation
Building
TPD-283
Touch Screen PLC and
PET-7044
PoE I/O Module are programmed to accept momentary or latching alarm devices. The
TPD-283
displays warnings and alarm conditions.
KingView
combines subsystems including Fire Alarm, Security, Building Automation, Power Supply, Lighting, and Elevator systems together into one single unified automation information platform.
Cold Storage
Energy Management Techonology
Intelligent Power Management Control Systems
with WP-5147-EN
Programmable Controllers,
PET-7026
Power over Ethernet I/O Modules and
NS-205PSE
Power over Ethernet Switches
Environmental Control
SAR-713
Seismic Switch with Relay Outputs and
XP-8349-300
Programmable Automation Controller with
Indusoft SCADA Software
are used to close valves on chemical tanks when destructive earthquakes are detected.
Factory
Our ZT Series ZigBee Network of converters and I/O modules help with automating a factory.
HVAC
Machine
I-7188E2 and
ET-7018Z
help with monitoring a CNC machine's status, productivity, restoring programs and machine maintenance.
PCI-M512U
equips not only a 512KB SRAM for data store, but also two Li-batteries to maintain the data in the event of power failure. These Li-batteries can supply power continuously for the SRAM to retain the important data for almost 10 years
Machine to Machine
Click here
to read the Machine to Machine Application story using
uPAC-7186EX-FD-X305B
for Machine to Machine communication.
Manufacturing
Click here
to read the Manufacturing Application story using
I-7000 series remote data acquisition modules
Click here
to read the Steel Acid Water Treatment story using
iDCS-8830
for Manufacturing.
Click here
to read the Thermal Power Generation Control System story using
iDCS-8830
for Manufacturing.
Marine
Oil & Gas
Power
TPD-280U
Touch Screen PLC is used for controlling a ZeroWire Modbus RTU Based Control Module which controls auxiliary equipment.
Restaurant
Test and Measurement
Portable Automated pH Detection System using
Wincon
Programmable Automation Controller
Transportation
Web based Immediate Long Distance Emergency Warning System with
ET-7000
Series
Convert J1939 Data into Modbus using GW-7238D. For a data exchange between Siemens PLC and Modbus PLC, use the GW-7552 Profibus to Modbus gateway.
Warning Systems
TPD-283
Touch Screen PLC and
PET-7044
PoE I/O Module are programmed to accept momentary or latching alarm devices. The
TPD-283
displays warnings and alarm conditions.
Water Management
KingView SCADA Software helps with monitoring and control of a water system. This demo shows a system that can monitor the pollution information and water quality.
KingView SCADA Software helps operators to easily monitor the temperature of the retort and the container of the product, and also can get the liquid positions of tanks.
Groundwater pumping system upgrade using
VP-25W9
,
tGW-700
, and
Indusoft
SCADA software.
Groundwater pumping system upgrade using
VP-25W9
,
tGW-700
, and
Indusoft
SCADA software.
Groundwater pumping system upgrade using
VP-25W9
,
tGW-700
, and
Indusoft
SCADA software.
I-7000 series modules
were used in monitoring and for data acquisition for a water treatment plant.
I-7520
converters and
I-7510
repeaters were used for data communication.
Wind Farms
GW-7433D
Modbus to CANopen gateways,
NS-205
Industrial Ethernet Switches and
I-7520
RS-232 to RS-485 converters were used to help with monitoring and control
Applications By Technology
Automation
Brings new “light” to production lines with
I-7000
modules and
I-7188
controllers
Unmanned Mountain Station Supervisory System using
I-7188
and
I-7000
modules
Low Cost DCS Application for Cement Plant Process Automation using
I-7000
series remote data acquisition modules,
I-7188
, and
I-7520
KTVs (Karaoke Boxes) Lighting Control and AC automation systems with
Touchpad
controllers,
LC-131
lighting control modules and
tM-R5
data acquisition modules.
SAR-713
Seismic Switch with Relay Outputs and
XP-8349-300
Programmable Automation Controller with
Indusoft SCADA Software
are used to close valves on chemical tanks when destructive earthquakes are detected.
In each street lamp control box, we placed a
WinPAC
and I/O Modules to acquire data from the control box.
Our Zigbee products are being used in traffic light monitoring applications.
Data Acquisition
Stand Alone Data Acquisition System that collects, pre-analyzes, and stores various soil and weather parameters using
I-7188EXD
,
I-7018Z
and
I-7019R
Each chicken's information is sent wirelessly to a computer using
zigbee
technology.
TPD-283
Touch Screen PLC and
PET-7044
PoE I/O Module are programmed to accept momentary or latching alarm devices. The
TPD-283
displays warnings and alarm conditions.
With
G-4500
PACs installed, hydrologic data gathering stations are established along the river.
Intelligent Power Management Control Systems
with
WP-5147-EN
Programmable Controllers,
PET-7026
Power over Ethernet I/O Modules and
NS-205PSE
Power over Ethernet Switches
SAR-713
Seismic Switch with Relay Outputs and
XP-8349-300
Programmable Automation Controller with
Indusoft SCADA Software
are used to close valves on chemical tanks when destructive earthquakes are detected.
I-7000 series modules
were used in monitoring and for data acquisition for a water treatment plant.
Data Logging
Monitoring
I-7000
series and
I-7520
Applied in Computer-based Remote Dispatching System for Thermoelectric Plant
I-7188E2
and
ET-7018Z
help with monitoring a CNC machine's status, productivity, restoring programs and machine maintenance.
Remotely monitor gas pressures in transportation pipelines using
HRT-711
,
XP-8000
and
I-87H17W.
Cryogenic liquefied gas storage tank monitoring for a customer in Romania with
G-4500-2G
to monitor the real time status and inventory of the system.
TPD-283
Touch Screen PLC and
PET-7044
PoE I/O Module are programmed to accept momentary or latching alarm devices. The
TPD-283
displays warnings and alarm conditions.
I-7520
and
I-7000
modules used in voltage monitoring system.
GW-7433D
Modbus to CANopen gateways,
NS-205
Industrial Ethernet Switches and
I-7520
RS-232 to RS-485 converters were used to help with monitoring and control
Motion Control
OEM Solution for motion control applicaitons, using
I-8000
controller, FR-net, and
I-8094
Remote Maintenance
M-4132, provides convenient remote maintenance functions such as one-on-many connection and audio function.
Touch Screen Control
TPD-283
Touch Screen PLC and
PET-7044
PoE I/O Module are programmed to accept momentary or latching alarm devices. The
TPD-283
displays warnings and alarm conditions.
TPD-280U
Touch Screen PLC is used for controlling a ZeroWire Modbus RTU Based Control Module which controls auxiliary equipment.
ICP DAS USA is proud to have an extensive rapport with a multitude of long time satisfied customers such as:
ABB | Abbott Laboratories | Andover Controls |
Applied Material | Argonne National Lab | Beckman Coultler |
Battelle | Black & Decker | BMW |
Boeing | Bosch | Brooks Automation |
B3 Systems | Caterpillar | Cisco Systems |
Cognex | Department of Defense | Duke Energy |
Duracell | Ecolab | FAA |
Fanuc Robotics | GE | General Dynamics |
Guidant | Harris Ranch Beef | Honeywell |
Johnson Controls | JPL | Lockeheed Martin |
L-3 Communications | Medtronic | NASA |
Naval Air Warefare Center | Naval Surface Warefare | Northrop |
Nucor Steel | New York Metro | Oakridge National Lab |
Philips Morris | Port of Oakland | Proctor & Gamble |
Raytheon | Rockwell Collins | SAIC |
TAC America | Thermo King | TRW |
UL | US Navy | Yale University |