> Programmable Automation Controllers > WinPAC Windows CE PAC > WP-5147

ISaGRAF IEC61131 based Windows embedded Programmable Automation Controller (PAC) with Windows CE .NET 5.0 OS, Ethernet, USB, RS-485 and RS-232 ports and din rail mount. Supports I/O expansion bus. Supports operating temperatures between -25C to 75C (-13F ~ 167F). Comes with free SoftGRAF HMI development software and eLogger data logging software.

WP-5147

ISaGRAF IEC61131 based Windows embedded Programmable Automation Controller (PAC) with Windows CE .NET 5.0 OS, Ethernet, USB, RS-485 and RS-232 ports and din rail mount. Supports I/O expansion bus. Supports operating temperatures between -25C to 75C (-13F ~ 167F). Comes with free SoftGRAF HMI development software and eLogger data logging software.

References & Support

Features

This module has been phased out and replaced by the WP-5238-CE7

WP-5147 and WP-5147-OD Series are equipped a PXA270 CPU (520 MHz) running a Windows CE.NET 5.0 operating system, various connectivity (VGA, USB, Ethernet, RS-232/485) and I/O expansion bus for one XW-Board. The benefits of running Windows CE 5.0 on WinPAC features hard real-time capability, small core size, fast boot speed, interrupt handling at a deeper level and achievable deterministic control. WinPAC is also capable of running ISaGRAF and PC-based control software such as Visual Basic .NET, Visual C#,…. etc. It has all of the best features of both traditional PLCs and Windows capable PCs.

Running HMI and Control Logic in the Same PAC
	New!!

	Trend and Gauge meter

	Alarm Lists

Software Features

Windows CE.NET 5.0 Core
ISaGRAF Ver.3 SoftLogic Inside
Support IEC 61131-3 Standard
Support Soft-GRAF HMI
Hard Real-Time Capability
Accepts max. 1 MB ISaGRAF code size

Hardware Features

PXA270 CPU (32-bit & 520 MHz)
VGA: Max. 800*600
I/O Expansion Bus
Audio with Microphone-In and Earphone-Out
Dual 10/100M Ethernet Ports
64-bit Hardware Serial Number for Software Protection
3 Serial Ports (RS-232/485)
Operating Temperature: -25 ~ +75 °C

Applications

Measure Humidity and Temperature Values via DL-100TM485

2G/3G Wireless Application

Database Application

Soft-GRAF: Create A Colorful HMI	Modbus RTU/TCP Slave Ports
	Modbus RTU/ASCII Master Ports
eLogger HMI Application	Modbus TCP/IP Master
Redundant Communication System	SMS: Short Message Service
Redundant System with Ethernet I/O	Multiple Web HMI - Monitor & Control Everywhere!
Redundant System with RS-485 I/O	Data Recorder and Data Logger
Remote I/O Modules and Expansion module/board	Data Exchange: Ebus
ZigBee Wireless Solution	VIP Communication Security
Integrate with CAN/CANopen Devices and Sensors	As a Modbus Gateway for the Remote I/O Modules
Send Email with One Attached File


"Applications Supporting List" & all applications

Specifications

Models		WP-5147	WP-5147-OD
System Software
OS		Windows CE 5.0 Core
.Net Compact Framework		3.5
Embedded Service		FTP Server, Web Server
Multilanguage Support		English, German, French, Spanish, Russian, Italian, Korean, Simplified Chinese, Traditional Chinese
Development Software
ISaGRAF Software	ISaGRAF Ver.3	IEC 61131-3 standard
	Languages	LD, ST, FBD, SFC, IL & FC Support Soft-GRAF HMI : XP-8xx7-CE6, XP-8xx7-Atom-CE6, WP-8xx7/5xx7 and VP-2xW7/4xx7 PAC
	Max. Code Size	1 MB
	Scan Time	3 ~ 15 ms for normal program 15 ~ 50 ms for complex or large program
Non-ISaGRAF		Options: MS eVC++ 4.0 or VS.NET 2005/2008 (VB.NET, C#.NET)
CPU Module
CPU		PXA270, 520 MHz
SDRAM		128 MB
Flash		64 MB
EEPROM		16 KB
Expansion Flash Memory		microSD socket with one microSD card (support up to 32 GB)
Battery Backup SRAM		Require one XW608, 512 KB (for retain variables)
RTC (Real Time Clock)		Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number		Yes, for Software Copy Protection
Dual Watchdog Timers		Yes
LED Indicator		1 LED for Power and Running 2 LEDs for user programmable
Rotary Switch		Yes (0 ~ 9)
VGA & Communication Ports
VGA		Yes ; 640 x 480, 800 x 600
Ethernet		RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
USB 1.1 (client)		1
USB 1.1 (host)		1
Audio		-	Microphone-In and Earphone-Out
COM1		RS-232 (RxD, TxD and GND); Non-isolated
COM2		RS-485 (Data+, Data -); 2500 VDC isolated
COM3		RS-232 (RxD, TxD and GND); Non-isolated
I/O Expansion
I/O Expansion Bus		Yes; to mount one optional XW-Board . No supporting XW5xx board (i.e. XW506, XW507, XW508, XW509, XW511i, XW514)
Mechanical
Dimensions (W x L x H)		91 mm x 132 mm x 52 mm
Installation		DIN-Rail Mounting
Environmental
Operating Temperature		-25 ~ +75 °C
Storage Temperature		-30 ~ +80 °C
Ambient Relative Humidity		10 ~ 90 % RH (non-condensing )
Power
Input Range		+10 ~ +30 VDC
Isolation		1 kV
Consumption		4.8 W	6 W
Protocols (some protocols need optional devices)
NET ID		1 ~ 255, User-assigned by software
Modbus TCP/IP Master		Link to max. 100 devices that support Standard Modbus TCP/IP Slave protocol. Support one or more tGW-700 series gateway (Modbus TCP to Modbus RTU/ASCII) to expand many Modbus RTU / ASCII master ports to connect many Modbus RTU / ASCII slave devices.
Modbus RTU/ASCII Master		Support Multi-port. Max. 10 ports
Modbus RTU Slave		Max. 5 ports
Modbus TCP/IP Slave		Ethernet LAN1 & LAN2 support total up to 32 connections. When one Ethernet port is broken, the other one can still connect to PC/HMI.
Web HMI Protocol		Ethernet Ports for connecting PC running Internet Explorer.
User-Defined Protocol		COM1 ~ COM3 by Serial communication function blocks.
I-7000 & I-87K RS-485 Remote I/O		COM2 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards and RU-87Pn + I-87K High Profile I/O boards as Remote I/O. Max. 255 modules for one controller.
M-7000 Series Modbus I/O		Max. 10 RS-485 ports (*) can support M-7000 I/O. Each port can connect up to 32 M-7000 Modules.
Modbus TCP/IP I/O		LAN2 supports ICP DAS Ethernet I/O: I-8KE4-MTCP and I-8KE8-MTCP. If LAN2 is broken, it will switch to LAN1 automatically to continuously work. (LAN1 & LAN2's IP are requested set in the same IP domain)
Send Email		Supports functions to send Email with one attached file via Ethernet port.
Ebus		LAN2 to exchange data between ISaGRAF Ethernet PAC via Ethernet port.
UDP Server & UDP Client : Exchange Message & Auto-Report		LAN1 or LAN2 support UDP Server and UDP Client protocol to send/receive message to/from PC/HMI or other devices.
TCP Client : Exchange Message & Auto-Report		LAN1 or LAN2 supports TCP Client protocol to send/receive message to/from PC/HMI or other devices which support TCP server protocol. Ex: automatically report data to InduSoft's RXTX driver, or to connect a location camera.
Soft-GRAF HMI		Support the Soft-GRAF HMI. User can use the Soft-GRAF Studio on the PC to design the HMI screen and then download it to the PAC to display the HMI on the PAC.
SQL Client		Support SQL Client function to write data to (or read data from) Microsoft SQL Server (2000 SP3, 2005, 2008).
CAN/CANopen		COM1, COM3 can connect one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One WP-5xx7 supports max.10 RS-232 ports to connect max. 10 I-7530.
FTP Client		Support FTP client to upload files in the PAC to a remote FTP server on PC. Soft-GRAF’s g_Alarm & g_Logger1 HMI objects support FTP client, too.
Note: COM5 ~ COM12 are resided at the optional expansion XW-Board series if it is plugged inside the WP-5xx7. Recommend to use NS-205/NS-208 or RS405/RS408 Industrial Ethernet Switch.