G-4500/D-SIM300
Mini PAC with GPRS. Has an Ethernet port, 3 digital inputs, 3 digital outputs, 8 analog inputs, 2 RS-232 COM ports and 1 RS-485 COM port, supports Modbus RTU. Comes with or without display
References & Support
Features
G-4500 has been PHASED OUT replaced by the G-4500-SIM340 and G-4500D-SIM340
ICP DAS has just launched the mini-style G-4500 series. They feature M2M (Machine to Machine) which a hot topic in the 21 century. G-4500 makes monitoring, immediate message sharing, andquick responding possible.. It is an intelligent, efficient machine that effectively lowers labor costs.
G-4500 is a compact programmable automation controller with an antenna and built-in GPRS/GSM. G-4500 not only monitors the data but sends them out in real time to the control center if necessary. GPS is an optional accessory. With GPS, G-4500 becomes a tracking system which you can often find car systems, marine systems, etc.
Inside G-4500 is a high-performance CPU. Outside G-4500, is the standard interface of an antenna, an Ethernet port, 3 digital inputs, 3 digital outputs, 8 analog inputs, 2 RS-232 COM ports and 1 RS-485 COM port. GPS is optional. G-4500D comes with a 128 mm x 64 mm display for direct data presentation.
- Embedded MiniOS7, anti-virus
- Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
- 10/100 BASE-T NE2000 compatible Ethernet Controller
- COM port: COM1 (5-wire RS232), COM2 (RS-485), COM3 (3-wire RS232)
- Built-in self-tuner ASIC controller on RS-485 port
- I/O: 3 channel DI, 3 channel DO, 8 channel AI
- Support SD storage card
- GPRS/GSM: Tri-Band 900/1800/1900 MHz, Quad-band 850/900/1800/1900(option)
- Support TCP server, TCP client, UDP client connection from GPRS
- GPS : 16 channels with All-In-View tracking (option)
- 128*64 dots LCM display (only for G-4500D-SIM300)
- Support for Virtual COM technology
- Support Modbus Protocol
- High reliability in harsh environment
- Free easy-to-use software development toolkits
- Applications:
- Remote Control / Monitoring Systems
- GPS Systems
- Remote Control / Monitoring Systems
Specifications
Core Specifications | |
CPU: | 80186, 80M Hz |
SRAM: | 512K Bytes |
Flash Memory: | 512K Bytes; Erase unit is one sector (64K bytes); 100,000 erase/write cycles. Has SD Socket. |
NVSRAM: | 31 Bytes (battery backup, data valid up to 10 year) |
EEPROM: | 16 KB |
Data retention: | 40 years; 1,000,000 erase/write cycles |
Real Time Clock: | Year-2000 compliance; seconds, minutes, hours, date of the month;month, year, valid up from 1980 to 2079 |
Watchdog Timer: | Built-in |
RS-232: | COM1(TxD, RxD, CTS, RTS, GND) |
COM3 | (TxD, RxD, GND) |
RS-485: | RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolation |
Analog Input: | Channel:8 /Resolution : 12-bit |
Input Range/Type | : 0 ~ 20mA |
Isolation Voltage: | Non-isolation |
Digital Input: | Channel:3 /Input Type: Sink |
Off Voltage Level: | +1V max. |
On Voltage Level: | +3.5V ~ +30V |
Isolation Voltage: | Non-isolation |
Digital Output: | Channel:3 /Output Type: Open-Collector (NPN) |
Load Voltage: | 30VDC, Max |
Load Current: | 100mA, Max |
Isolation Voltage: | Non-isolation |
GPS Specifications | |
High Performance Features | Atmel ANTARIS 4 ATR0635 chip |
16 channels | with All-In-View tracking |
high gain amplifier and bandpass filter | Built-in |
Cold/Warm Time: | 42 / 35 sec. at open sky and stationary environments. |
Reacquisition Time: | 0.1 second |
Extra high sensitivity: | -159dBm |
Connector | SMA |
GPRS Specifications | |
Tri-Band GSM/GPRS | 900/1800/1900 MHz |
GPRS | multi-slot class 10/8 |
GPRS | mobile station class B |
Compliant to GSM phase 2/2+ | -Class 4(2W @ 900 MHz) -Class 1(1W @ 18001900 MHz) |
Data Specifications: | -GPRS class 10: max. 85.6 kbps(downlink) |
-Coding schemes CS 1, 2, 3, 4 | |
-CSD up to 14.4 kbps | |
-USSD | |
-Non transparent mode | |
-PPP-stack | |
SMS via GSM/GPRS Specifications | -Point-to-point MO and MT |
-SMS cell broadcast | |
-Test and PUD mode |