3-Channel Analog Input (Current Input), 6-Channel Digital Inputs (16-bit Counters), and 3-Channel Power Relay Output PoE Module. Built-in Web Server, with operating temperature range of -25°C ~ +75°C (-13° ~ +167°F)


3-Channel Analog Input (Current Input), 6-Channel Digital Inputs (16-bit Counters), and 3-Channel Power Relay Output PoE Module. Built-in Web Server, with operating temperature range of -25°C ~ +75°C (-13° ~ +167°F)

  Price:  $689.00  


WISE-7102 (Web Inside, Smart Engine) is a device developed by ICP DAS USA that functions as a control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers with just a few clicks; no programming is required. With its powerful and easy-to-use features, it minimizes the learning curve, shorten time to market, and dramatically reduce effort and cost spent on system development.

The WISE-7102 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled networks by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. For cases under a non-PoE environment, WISE-7102 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7102 supports Modbus TCP protocol for seamless integration with SCADA software available. It features 3-channel analog inputs, 6-channel digital inputs and 3-channel Power Relay outputs. Each analog input channel provides 240 Vrms high over voltage protection.

  • Built-in Web Server for IF-THEN-ELSE rule setting
  • Built-in IF-THEN-ELSE rule engine for logic operation
  • No more programming. Just click and get it done!
  • Support IO, Counter, Timer, email operations
  • Modbus/TCP Protocol for SCADA Software Semaless Integration
  • IEEE 802.3af-compliant Power over Ethernet (PoE)
  • 10/100 Base-TX Ethernet
  • Analog Input: 3-channel (mV, V, mA)
  • Digital Output: 3-channel (Power Relay, Form A)
  • Digital Input: 6-channel (Wet)


Analog Input
Input Channels 3 (Differential)
Input Type (Jumper Selectable) +/-150 mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V
+0 mA ~ +20 mA, +/-20 mA, 4 ~ 20 mA
Resolution 16-bit
Sample Rate 10 Sample/Sec. (Total)
Accuracy +/-0.1%
Zero Drift +/-20 μV/°C
Span Drift +/-25 ppm/°C
Overvoltage Protection 240 Vrms
Overcurrent Protection 50 mA max. at 110 VDC/VAC max
Input Impedence Voltage 2 MΩ
Current 125 Ω
Common Mode Rejection 86 dB min.
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Open Wire Detection Yes, for 4 ~ 20 mA only
Digital Input
Input Channels 6
Contact Wet Contact
Sink/Source (NPN/PNP) Sink/Source
On Voltage Level +10 VDC ~ +50 VDC
Off Voltage Level +4 VDC Max
Input Impedence 10 KΩ, 0.5W
Counters Channels 6
Max. Counts 16-bit (65535)
Max. Input Frequency 50 Hmz
Min. Pulse Width 10 ms
Overvoltage Protection +50 VDC
Power Relay
Channels 3
Type Power Relay, Form A (SPST N.O.)
Operating Voltage Range 250 VAC/30 VDC
Max Load Current 5.0A/channel at 25°C
Operating Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Life (Resistive load) VDE: 5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C.
5 A @ 30 VDC 70,000 ops (10 ops/minute) at 75°C.
UL: 5 A @ 250 VAC/30 VDC 6,000 ops
3 A @ 250 VAC/30 VDC 100,000 ops.
Mechanical Life 20,000,000 ops. at no load (300 ops./minute).
Intra-module Isolation, Field-to-Logic 3750 VDC
CPU 16-bit CPU
Flash Memory 512 KB
Watchdog Yes, Programmable over DCON
PoE Ethernet Port 10/100 Base-TX and automatic MDI/MDI-X
2-Way Isolation
I/O 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random poin
EFT (IEC 61000-4-4) ±4 kV for Power Line
LED Indicators
PoE PoE On
L1 System Running
L2 Ethernet Link/Act
L3 Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection Yes
Powered from Terminal Block Yes, 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class1
Consumption 3.0 W
Dimensions (W x H x D) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall mounting
Operating Temperature -25 °C ~ +75 °C (-13°F ~ +167°F)
Storage Temperature -30 °C ~ +80 °C (-22°F ~ 176°F)
Humidity 10 ~ 90% RH, non-condensing

Software Specifications

36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators
3 THEN actions
3 ELSE actions
48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers Delay / Timing functions.
12 Emails Send Email messages to pre-set Email receivers.
12 CGI Commands Send pre-set CGI commands.
12 Receipts Set up Then/ELSE action groups.
Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
AI Channel ON、OFF、ON to OFF、OFF to ON、Change
Internal Register =、>、<、>=、<=(value)
Rule Status Enable、Disable
P2P DI、AI、DI counter、DO counter、IR
DO Counter =、>、<、>=、<=(value)、Change
Timer Timeout、Not Timeout
THEN / ELSE Actions
DO Channel ON、OFF、Pulse Output
Internal Register Change the value
DO Counter Reset
Timer Start、Stop
Email Start、Stop
CGI Commands
Recipe Execute
P2P DO(On/Off)、AO、IR
Rule Status Enable、Disable

Related Products