5-Channel Analog Input, 2-Channel Analog Output (current input), 2-Channel Digital Input, and 2-Channel Digital Output Module. 4kV ESD Protection. 240 Vrms Overvoltage protection for voltage input. Has operature range of -25°C ~ +75°C (-13°F ~ +167°F)

USB-2026

5-Channel Analog Input, 2-Channel Analog Output (current input), 2-Channel Digital Input, and 2-Channel Digital Output Module. 4kV ESD Protection. 240 Vrms Overvoltage protection for voltage input. Has operature range of -25°C ~ +75°C (-13°F ~ +167°F)

  Price:  $579.00  

Features

The USB-2026 is a multifunction module that includes 5 analog input (current input) channels, 2 analog output channels, 2 digital input channels, 2 digital output channels and compatibles with USB 2.0 full-speed. It is a portable USB bus powered device equipped with various input type features to help user build up projects easily and quickly. Compare with traditional PC I/O card, opening the chassis and configuring the I/O board are a bit more cumbersome. You will enjoy the simple controlling of I/O in the efficient way. USB-2026 I/O are equipped with a USB bus powered feature, one cable to access I/O and provide power without additional power wiring. USB-2026 I/O is a small size module. You can use these I/O modules in wide range application, ex: fan-less control or measurement, automatically test with BOX-PC.

The USB-2026 provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA), analog outputs are 12-bit at +/-5 V, +/-10 V, 0 ~ +20 mA or +4 ~ +20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms.

  • Multifunction (5 AI, 2 AO, 2DI and 2 DO)
  • Overload and Short Circuit Protection for Digital Output
  • 240 Vrms Overvoltage Protection for Voltage Input
  • 4kV ESD protection
  • Wide Operating Temperature Range
  • 3000 VDC Intra-Module Isolation
  • USB 2.0 Full-Speed
  • USB Bus Powered
  • Lockable USB cable
  • Driver Free
  • CE Certification
  • FCC Certification

Specifications

Analog Input
Channels 5 Differential
Input Type Voltage: +/-1 V, +/-2.5 V, +/-5 V, +/-10 V
Current: +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Load Voltage Normal Mode 14 bit
Fast Mode 12-bit
Sampling Rate Normal Mode 10 Hz total
Fast Mode 200 Hz total
Overvoltage Protection Normal Mode +/-0.1% FSR
Fast Mode +/-0.5 % FSR
Zero Drift +/-20 μV/°C
Span Drift +/-25 ppm/°C
Input Impedence Voltage: 20 MΩ
Current: 135 Ω
Overvoltage Protection Voltage: 120 VDC
Current: N/A
Overcurrent Protection Voltage: N/A
Current: Yes, 50 mA at 110 VDC
Analog Output
Channels 2
Range (Jumper Selectable) Voltage: +0~+5 VDC, +0~+10 VDC, +/-5 VDC, +/-10 VDC
Current: +0~+20 mA, +4~+20 mA
Resolution 12-bit
Accuracy +/-0.1% of FSR
Output Capacity Voltage Output Capacity 10 V @ 20 mA
Open Wire Detection Yes, for 4 ~ 20 mA only
Power On Value Yes
Safety Value Yes
Digital Input
Channel 2
Type Dry Contact (Source)
On Voltage Level Close to GND
Off Voltage Level Open
Input Impedence 10 KΩ, 0.5 W
Counters Channels 2
Max. Count 4,294,967,285 (32-bit)
Max. Input Frequency 100 Hz
Min. Plus Width 10 ms
Overvoltage Protection +/-57 VDC
Digital Output
Chanels 2
Type Isolation Open Collector (Sink)
Max. Load Current 700mA/Channel
Load Voltage +3.5 ~ 50 VDC
Overvoltage Protection +/-60 VDC
Overload Protection 1.4 A (with short-circuit protection)
Short Circuit Protection Yes
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
Communication
Interface USB 2.0 Full-Speed
Watchdog 1 Hardware watchdog (1.6 seconds)
1 Software watchdog (Programmable)
LED Indicators
System LED Indicators 3 LED as Power, Run and Error
EMS Protection
ESD (IEC 61000-4-2) 4 kV contact for each terminal
8 kV air for radnom point
Mechanical
Dimensions (W x L x H) 33 mm x 78 mm x 107 mm
Environment
Operating Temperature -25°C ~ +75°C (-13°F ~ +167°F)
Shortage Temperature -40°C ~ +85°C (-40°F ~ +176°F)
Humidity 10 ~ 95% RH, non-condensing

Related Products