USB-2060
6-channel Isolated Digital Input and 6-channel Relay Output Module. Power consumption of 1.30 W, USB 2.0 Full-Speed. Has operating temperatures of -25° C ~ 75°C (-13°F ~ 167°F)
Features
- 6-channel digital input and 6-channel relay output
- Dry Contact and Wet Contact Selectable via Wire Connections
- Long Distance Measurement
- All Channels can be used as 16-bit Counters
- 5A current contact rating
- Configurable Power-on Value Settings
- Safety functionality when communication failed
- Wide operating temperature range:-25°C~+75°C
- 2500 VDC Intra-Module isolation
- RoHS compliant
- USB 1.1/2.0 Full-Speed
- No external power supply (USB Bus Powered)
- Plug-and-Play without driver
- Lockable USB cable
- Support firmware update via USB
- Utility tool for module configuration and I/O testing easily and quickly
- PWR/RUN/ERR LED indicators
- Built-in dual watchdog (hardware/software)
- Provide API library (VC/VB/BCB/.NET)
- Module supported for Win2000/XP and Win7 (32/64 bit)
The USB-2060 is a full-speed USB device with 8 digital input and digital output channels module, and offers features for industrial control and manufacturing test applications, such as factory automation or embedded machine control. The USB-2060 provides 6 digital input channels, 6 Form A signal relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink or source type via wire connections. The USB-2060 also provides 12 LED indicators that can be used to monitor the status of the digital input and relay output. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. With the true Plug & Play capability, it needs not opening up your computer chassis to install boards-just plug in the module, then get or set the data. Owing to another USB feature known as "hot-swapping", users do not even need to shut down and restart the system to attach or remove the USB-2060.
The USB I/O utility can help users to configure and test USB-2060 quickly and easily without programming; In addition, we also provide the friendly API library and demos for users to develop own USB application with various application development tools (VB/C++/C#.NET/VB.NET). Therefore, the USB-2060 is the perfect way to add control capability to any USB capable computer.
Specifications
| Digital Input | |||
| Channels | 6 | ||
| Type | Dry Contact | Source | |
| Wet Contact | Sink/Source | ||
| On Voltage | Dry Contact | Close to GND | |
| Wet Contact | +10 VDC ~ +50 VDC | ||
| Off Voltage | Dry Contact | Open | |
| Wet Contact | +4 VDC Max. | ||
| Effective Distance For Dry Contact | 500 meters Max. | ||
| Overvoltage Protection | 70VDC | ||
| Input Impedence | 10 KΩ | ||
| Counter | Max. Count | 65535 (16-bit) | |
| Max. Input Frequency | 500 Hz | ||
| Min. Pulse Width | 1 ms | ||
| Relay Output | |||
| Channels | 6 | ||
| Type | Form A (SPST-NO) | ||
| On Voltage | Dry Contact | 5 A @ 24 VDC | |
| Wet Contact | 5 A @ 250 VAC (47 ~ 63 Hz) | ||
| Operating Time | 10 ms (Max.) | ||
| Release Time | 5 ms (Max.) | ||
| Insulation Resistance | 70VDC | ||
| Input Impedence | 11,000 MΩs at 500 VDC | ||
| Dielectric Strength | Between Open Contact | 1000 VAC (1 min.) | |
| Between Coil and Contacts | 3000 VAC (1 min.) | ||
| Endurance | Mechanical | 2 x 10^7 ops | |
| Electrical | 1 x 10^5 ops | ||
| Power On Value | Yes | ||
| Safety Value | Yes | ||
| Communication | |||
| Interface | USB 2.0 Full-Speed | ||
| Watchdog | 1 Hardware watchdog (1.6 second) | ||
| 1 Software watchdog (Programmable) | |||
| LED Indicators | |||
| System LED Indicators | 3 LED as Power, Run and Error | ||
| I/O LED indicators | 8 LEDs as power relay indicators | ||
| EMS Protection | |||
| ESD (IEC 61000-4-2) | 4 kV contact for each terminal | ||
| 8 kV air for random point | |||
| Mechanical | |||
| Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm | ||
| Environmental | |||
| Operating Temperature | -25°C ~ +75°C (-13°F ~ 167°F) | ||
| Storage Temperature | -40°C ~ +85°C (-40°F ~ 185°F) | ||
| Humidity | 10 ~ 95% RH, non-condensing | ||
| Power | |||
| Power Consumption | Maximum: 1.30 W | ||
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
USB-2060
6-channel Isolated Digital Input and 6-channel Relay Output Module. Power consumption of 1.30 W, USB 2.0 Full-Speed. Has operating temperatures of -25° C ~ 75°C (-13°F ~ 167°F)
$209.00 Each
Quantity added: