I-87063W
4-channel Isolated Digital Input and 4-channel Relay Output Module with 16-bit Counters. Replacement unit for I-87063.
References & Support
Features
I-87063W has a serial bus (RS-485) communication interface with DCON protocol. It can be used with our WinPAC, viewPAC, and XPAC controllers. I-87063W is an 4-channel Isolated Digital Input and 4-channel Relay Output Module with 16-bit Counters. I-87063W is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.
Specifications
Digital Input | |
Input Channels | 4 (Sink/Source) |
Input Type | Isolation, Differential |
On Voltage Level | +3.5V ~ 30V |
Off Voltage Level | +1V max |
Input Impedance | 3K Ohms, 0.25W |
Counters | Channels : 4 |
Max. Counters : 16-bit (65535) | |
Max. Input Frequency : 100Hz | |
Min. Pulse Width : 5ms | |
Intra-module Isolation, Field to Logic | 3750Vrms |
4KV ESD Protection | Yes, contact for each terminal |
Digital Output | |
Output Channels | 4 |
Output Type | Power Relay, Form C |
Operating Voltage Range | 5A (NO)/3A(NC)@5 ~ 24VDC |
5A(NO)/3A(NC)@0 ~ 250VAC | |
Relay Contact Voltage Range | 5A(NO)/3A(NC)@30VDC |
5A(NO)/3A(NC)@277VAC | |
Max. load Current | 5A(NO)/3A(NC) |
Max. Operate Time | 10 ms Max. |
Max. Release Time | 5 ms Max. |
Insulation Resistance | Min. 1000 MOhms, at 500VDC |
Dielectric Strength | Between Open Contacts : 750VAC, 50/60Hz (at 1 Minute) |
Between Coil and Contacts : 4000VAC, 50/60Hz (at 1 Minute) | |
Relay Life | Mechanical : 5 million ops (no load). |
Electrical : 100, 000 Min. (rated load) | |
4KV ESD Protection | Yes, contact for each terminal |
LED Display | |
1 LED as Power/ Communication Indicator | |
8 LEDs as Digital Input and Relay output Indicators | |
Power | |
Power Consumption | 1.5 W |
Environment | |
Operating Temperature | -25 to 75 °C |
Storage Temperature | -30 to 75 °C |
Humidity | 5 to 95% RH, non-condensing |
Dimensions | |
30mm x 102mm x 115mm(W x L x H) Detail |