ET-87P4
4 Slots I/O Expansion Unit with 2 10/100 Base TX RJ-45 Ethernet ports. Din rail mountable. Supports daisy chain Ethernet cabling. Supports operating temperatures of -25 ~ +75C
Features
ET-87Pn series is a remote intelligent I/O expansion unit to expand I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. It offers two Ethernet switch ports to form a daisy-chain topology. The daisy-chain feature allows ET-87Pn to connect in series to each other or other Ethernet devices. Uses can easily simplify the cabling and save installation space with the feature.
ET-87Pn is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 ~ 30 VDC), isolated power input and can operate under wide temperature (-25 °C ~ +75 °C). To simplify installation and maintenance of I/O modules, it provides many useful features, such as: hot swap allowed, auto configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power on and safe values for safety.
The unit supports more than 30 I/O modules including analog input/output, digital input/output, counter, frequency I/O modules. We provide various software development kits (SDK) and demos, such as DLL, ActiveX, Labview driver, InduSoft driver, Linux driver, OPC server, etc. The I-87K series I/O modules plugged in the ET-87Pn can be easily integrated into variant software system.
Features
- Two Ethernet Ports for Daisy-Chain Topology
- I/O Module Hot Swap
- Auto Configuration
- LED Indicators for Fault Detection
- Push Buttons to Configure IP Address
- DCON Protocol
- 4/8 I/O Slots for I-87K Modules
- Operating Temperature: -25 ~ +75 °C
Specifications
Interface Type: Ethernet | ||
Port | RJ45*2 10/100Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) |
|
Cabling | Daisy-Chain Ethernet Cabling | |
Isolation | 3000 VDC | |
ESD Protection | +/- 4K Contact Discharge and +/- 8K Air Discharge | |
Communication Protocol | DCON Protocol (ASCII format) | |
LED Indicators | ||
Power | Yes | |
System Ready | Yes | |
Auto configuration | Yes | |
Slot Status | Yes | |
IP Address | Yes (with push buttons to configure IP address) | |
I/O Expansion Slots | ||
I/O Module Hot Swap | Yes | |
Auto Configuration | Yes | |
Support Module Type | High profile I-87K module only | |
Slots | ||
ET-87P4 | 4 | |
ET-87P8 | 8 | |
Dimensions (W x H x D) | ||
ET-87P4 | 188 mm x 132 mm x 111 mm | |
ET-87P8 | 312 mm x 132mm x 111 mm | |
Power | ||
Input Range | 10 ~ 30 VDC (non-regulated) | |
Redundant Input | Yes | |
Reverse polarity protection | Yes | |
Isolation | 1000 VDC | |
Frame Ground | Yes | |
Consumption | Power Board Driving | |
ET-87P4 | 2 W | 30 W |
ET-87P8 | 2.4 W | 30 W |
Environment | ||
Operating Temperature | -25 ~ +75 °C | |
Storage Temperature | -30 ~ +75 °C | |
Humidity | 5 ~ 95%, Non-condensing |