IP-based Ethernet I/O monitoring and control module with 2 Ethernet ports, 6-channel Relay Output and 6-channel Digital Input.  Built-in web server for easy configuration. Supports Modbus TCP and Modbus UDP protocol. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)

ET-2260

IP-based Ethernet I/O monitoring and control module with 2 Ethernet ports, 6-channel Relay Output and 6-channel Digital Input. Built-in web server for easy configuration. Supports Modbus TCP and Modbus UDP protocol. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)

  Price:  $269.00  

Features

Equipped with various digital I/O functions, the ET-2260 module serves as an IP-based Ethernet I/O monitoring and control module. With its 10/100 MB network connection capability, the module can remotely be controlled via Modbus TCP/UDP protocol. Since Modbus has become a de facto standard communications protocol in industry, it is the most commonly available means of connecting industrial electronic devices. This makes the ET-2260 module most ideal for integrating with the HMI, SCADA, PLC and other software systems.

The ET-2260 provides 6 wet contact Digital Input channels and 6 Form A electromechanical Relays. There are 2 Ethernet ports, which allow daisy-chaining for the ET-2260. This type of connection configuration permits for greater flexibility in locating devices, simplifies installation, and lowers cost in infrastructure. Featuring a 8 kV ESD protection, 4 kV EFT protection, 3 kV surge, and 3000 VDC I/O isolation offers impromved noise protection capabilities in industrial environments. Each input channel can be used as a 32-bit counter. The power-on value and safe value of relay are configurable.

The module can be used to create Digital Input to Digital Output pair-connect through the Ethernet. After configuration, the ET-2260 module can poll the status of the local Digital Input channels and then use the Modbus/TCP protocol to continuously write to the remote Digital Output devices.

The terminal block connectors are for easy wiring in industrial situations. The ET-2260 is equipped with a powerful 32-bit ARM MCU, which offers efficient network trafficking.

  • Built-in Web Server
  • Support Modbus TCP/UDP Protocols
  • Powerful 32-bit MCU Handles Efficient Network Traffic
  • 2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring
  • Dual Watchdog
  • I/O Pair Connection (Push and Polling)
  • Supports web configuration and firmware via Ethernet
  • Built-in I/O (input/output)
    • DI/Counter: 6 channels
    • Power Relay: 6 channel
  • LED Display to indicate the I/O status
  • Wide Operating Temperature Range: -25°C ~ +75°C (-13°F ~ +167°F)

Specifications

System
CPU
32 bit ARM
Communication
Ethernet Port 2 x RJ-45, 10/100 Base-Tx, Switch Ports
Protocol Modbus TCP, Modbus UDP
Security Password and IP Filter
I/O Pair Connection Yes (Push, Polling)
Dual Watchdog Yes, Module, Communication (Programmable)
LAN Bypass Yes
LED Indicator
For System Running
Yes
For Ethernet Link/Act
Yes
For DI/DO Status
Yes
2-Way Isolation
Ethernet
1500 VDC
I/O
3000 VDC
EMS Protection
ESD (IEC 61000-4-2)
±8 kV Contact for Each Terminal and ±16 kV Air for Random Point
ESD (IEC 61000-4-4)
±4 kV for Power Line
Surge (IEC 61000-4-5)
±3 kV for Power Line
Power Requirement
Reverse Polarity Protection Yes
Powered from Terminal Block +10 ~ +30 VDC
Consumption
3.3 W (Max.)
Mechanical
Dimensions (L x W x H)
127 mm x 33 mm x 99 mm
Installation
DIN-Rail or Wall mounting
Environmental
Operating Temperature
-25°C ~ +75°C (-13°F ~ +167°F)
Storage Temperature
-30°C ~ +80°C (-22°F ~ +176°F)
Ambient Relative Humidity
10 ~ 90% RH, Non-condensing

I/O Specification

Digital Input/Counter
Channel 6
Contact Wet Contact
Sink/Source (NPN/PNP) Sink/Source
On Voltage Level +5 VDC ~ +50 VDC
Off Voltage Level + 3.5 VDC Max.
Input Impedence 7.5 kΩ
Counters Max. Count 4,294,967,295 (32 bits)
Max. Input Frequency 3 kHz
Programmable Digital Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Overvoltage Protection +70 VDC
Power Relay
Channels 6
Type Power Relay, Form A (SPST N.O.)
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Min. Contact Load 10 mA @ 5 V
Operating Time 10 ms (max.)
Release Time 5 ms (max.)
Mechanical Endurance 2 × 107 ops.
Electrical Endurance 105 ops.
Power-On Value Yes, Configurable
Safe-Value Yes, Configurable

Related Products