WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7902 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7902 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This module WISE-7902 supports Modbus TCP protocol to make seamless integration with SCADA software available. It supports an I/O expansion bus to implement various I/O functions such as D/I and D/O according to the using FRnet modules: FR-2053T, FR-2054T, and FR-2057T.
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule enigne for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Email operations
- Modbus TCP Protocol for SCADA Software Seamless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- I/O expansion bus
- Support FRnet Modules: FR-2053T, FR-2054T, FR-2057T
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
Reference & Support
|RTC (Real Time Clock)||RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079|
|64-bit Hardware Serial Number||Yes|
|Watchdog Timers||Yes (0.8 second)|
|Ethernet||RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)|
|COM 1||No (Unsupported by WISE firmware)|
|COM 2||No (Unsupported by WISE firmware)|
|FRnet||Max. 1 M|
|System LED||Yes (Red)|
|Special Indicator||PoE LED (Green)|
|Dimensions (W x H x D)||72 mm x 123 mm x 35 mm|
|Installation||DIN-Rail or Wall Mounting|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-40 ~ +80 °C|
|Ambient Relative Humidity||5 ~ 90% RH, non-condensing|
|Protection||Power reverse polarity protection|
|Frame Ground||Yes (for ESD Protection)|
|Input Range||+12 ~ +48 VDC|
|Power over Ethernet (PoE)||IEEE 802.3af Class 1|
|Power Consumption||1.5 W|
|Rule Configuration Website||Access Web server on WISE controllers to edit and upload logic rules through web browser.
|36 IF-THEN-ELSE Logic Rules||3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions
|48 Internal Registers||Hold temporary variables and read/write data via Modbus TCP address.
|12 Timers||Delay / Timing functions.
|12 Schedules||Setup prescheduled routine tasks.
|12 Emails||Send Email messages to pre-set Email receivers.
|12 CGI Commands||Send pre-set CGI commands.
|12 Recipes||Set up THEN/ELSE action groups.
|8 P2P remote modules||Set up the connection information for the remote WISE modules.
|Modbus TCP Protocol||Real time control and monitoring I/O channels and system status of controllers via SCADA software.
|DI Channel||ON、OFF、ON to OFF、OFF to ON、Change|
|Schedule||In Range、Out of Range|
|P2P||DI、AI、DI counter、DO counter、IR|
|THEN / ELSE Actions|
|DO Channel||ON、OFF、Pulse Output|
|Internal Register||Change the value|
8-channel FRNet Isol...
16-Channel FRNet Iso...
4-channel D,A (0~5V)...
Data acquisition con...
Small Industrial Enc...
48V , 0.52A, 25 W Po...
5-port Industrial Un...