The WISE-5231 is simple to use and integrates easily with I/O modules and sensors on the field side, supports various IoT protocols and integrates easily with SCADA/MIS/MES/IT/Network Management systems for real-time transfer of I/O information. It offers reliable real-time I/O logic control and data logger functions. It has a user-friendly web site-interface that allows for IF-THEN-ELSE control logic programming on controllers. This eliminates the need for custom hard-code programming.
A plethora of support in I/O functions are provided by the WISE-5231 making it very flexibile in terms of connectivity: DCON I/O modules, Rodbus RTU slave modules, Modbus TCP slave modules, and XV-boards. With CGI command functions built-in, you can configure devices such as IP cameras to take certain actions (such as begin or stop recording operations) using IF-THEN-ELSE logic rules. The WISE-5231 becomes the perfect concentrator of sensor and I/O modules for the IoT age in this regard.
- Simple, Easy-to-use, No Programming Required for System Development
WISE provides user-friendly Web UI pages for editing control logic on the controllers. To edit control logic, it only requires a browser to connect to WISE. No extra software tool installation is needed. WISE enables implementation of logic edition by a few clicks on the mouse to set up and deploy logic rules without writing a single line of code.
- IF-THEN-ELSE Logic Rules Execution Ability
WISE features an IF-THEN-ELSE logic rule engine; it offers IF-THEN-ELSE rules for users to set up the logic content. After completing rule edition and downloading rules to the WISE, the rule engine will loop execute the rules in accordance with the execution order under specific conditions.
- Connection Ability to A Variety of Sensors and Devices
WISE allows connection with sensors and devices that support Modbus TCP/RTU protocol. The ability to connect with Modbus TCP/RTU slave devices enables the ﬂexibility and scalability for system implementation and allows to meet various requirements of the applications from the clients.
***WISE-5231 supports DCON/Modbus RTU Slave devices (Up to 32) and Modbus TCP Slave devices (Up to 16).
- Provide Timer and Schedule Operation
WISE features Timer and Schedule functions: It allows user to schedule specific date or time for control logic execution, or perform specific tasks such as time delay. With calendar user interface provided, Schedule setting can be more efficient and ﬂexible.
- CGI Command Sending & Receiving for Surveillance System Integration
WISE supports full CGI command operations - CGI command sending and CGI command receiving. The CGI command sending action can be added to the logic edition as part of logic control in response to specific events. The CGI command receiving function enables WISE to receive the CGI commands from others network devices. The content of CGI command received can be used in IF condition statements to trigger the THEN/ELSE actions.
- Real-time alarm notification via SSL Email
WISE supports SSL Email sending function for real-time message notification operation. The message sending action can be added to the logic edition as part of logic control to provide real-time message notification to the related personnel when an event occurs.
- Data Logger Operation
With the microSD card, WISE provides Data Logger function to real-time record the I/O channel data of the controller and sends the data files automatically by FTP to the control center for further administration management or data analysis.
- Active I/O Sending Mechanism
In addition to the Modbus TCP/RTU slave function that enables SCADA system to poll the I/O channel data of the WISE, now WISE provides “Active I/O sending” mechanism (Modbus TCP master, SNMP Trap and MQTT publish). Based on the “Active I/O sending”, WISE allows to send the I/O channel data of the controller actively to SCADA/IT system by event trigger or periodic cycle. This function will improve the efficiency of the data communication between WISE and SCADA/IT system.
- A Variety of Protocols Supported for Integration with SCADA/IT/IoT Systems
WISE supports various SCADA/IT/IoT communication protocols to perform real-time monitoring and control of the controllers, and easy integration with the SCADA/MIS/MES/Facility management /Network management systems.
- Support Modbus TCP/RTU Protocol
- Support MQTT (MQ Telemetry Transport) for message publish/subscribe mechanism
- Support FTP Server/Client for the maintenance of data logger ﬁles
- Support SSL/TLS authentication Email sending for alarm notiﬁcation
- Support CGI command sending and receiving operations
- Support DDNS (Dynamic DNS) services