NS-200PS
Power Over Ethernet PoE Splitter splits the data and power signals that are transmitted from Power Sourcing Equipment. Provides 24VDC/.42A Power Output. Supports operating temperatures from -40°C ~ +75°C.
Features
The NS-200PS plays the role of PD, and splits the data signal and power signal that are transmitted from the PSE. The NS-200PS plays a dual role of providing power to industrial devices, and enabling Ethernet connections.
Specifications
| Models | NS-200PS |
| Technology | |
| Standards | IEEE 802.3, 802.3u, 802.3x,802.3af (Power over Ethernet) |
| PoE Input | |
| IEEE 802.3af PoE operation | Powered Device (PD) |
| PoE Power input range | +46~54 VDC |
| PoE power input | Automatic detection and classification (power is accepted on either the signal or unused pairs) |
| Voltage output Power Output | 24 VDC, 0.42 Amps |
| Power output | 10 watts |
| Cable length | |
| The specified maximum length of cable allowed between the PoE Switch and Ethernet device should be 100 meters or approximately 300 feet. The NS-200PS is not a repeater and does not amplify the Ethernet data signal. Figure 1 illustrates the maximum length of cable | |
| Mechanical | |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 33 mm x 78 mm x 107 mm |
| Installation | DIN-Rail |
| Environmental | |
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Ambient Humidity, Relative | 10% ~ 90% RH, non-condensing |
LED Indicator Functions
| LED | Color | Description |
| PWR | Red On | Power Output is On |
| Red Off | Power Output is Off |
Pin Function for Terminal Block
+24V Output: Power Output (+24 VDC); GND: Ground F.G.: F.G. stands for Frame Ground (protective ground). It is optional. If you use this pin, it can reduce EMI radiation; improve EMI performance and ESD protection.
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
...
$199.00 Each
Quantity added:
