4 Channel Relay Output & 4 Channel Isolated Digital Input Counter Data Acquisition Module. Communicable over Modbus RTU and RS-485 with LED Display, supports operating temperatures from -25 to 75°C

M-7060D

4 Channel Relay Output & 4 Channel Isolated Digital Input Counter Data Acquisition Module. Communicable over Modbus RTU and RS-485 with LED Display, supports operating temperatures from -25 to 75°C

  Price:  $219.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.
ADD TO CART
ADD TO CART
BUY BY 1-CLICK

Features

The M-7060 device is a network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
  • Communication Via ModBus Protocol
  • Channels: 4
  • Four isolated channels with common power
  • Relay output
  • Two form relay
  • SPST (N.O.)
  • Two form relay
  • SPDT
  • Dry contact
  • Din Rail Mount

Specifications

Communication
Interface RS-485 Modbus RTU, DCON
Format (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable over Modbus RTU)
LED Indicators/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators -
Yes, 8 LEDs as Digital Input/Relay Output Indicators
7-Segment LED Display -
Isolation
Intra-Module Isolation, Field-to-Logic 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) -
Protocol
Support Modbus and DCON Protocol Yes
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1 W
Mechanical
Dimensions ( W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing

I/O Specifications

Relay Output
Channel 4 (Form A x 2, Form C x 2)
Relay Type Single Relay
Form A Relay Contact Rating 0.6 A @ 125 VAC
2 A @ 30 VDC
Min. Contact Load 10uA @ 10 mV
Contact Material Gold-plated silver
Operate Time 3 ms
Release Time 2 ms
Mechanical Endurance 1 x 10^8 ops.
Electrical Endurance 5 x 10^5 ops.
Form C Relay Contact Rating 0.6 A @ 125 VAC
2 A @ 30 VDC
Min. Contact Load 10 uA @ 10 mV
Contact Material Gold-plated silver
Operate Material 3 ms
Release Time 2 ms
Mechanical Endurance 1 x 10^8 ops.
Eletrical Endurance 5 x 10^5 ops.
Surge Strength 1500 VDC
Power-on Value Yes
Safe Value Yes
Digital Input/Counter
Channel 4
Type Dry Contact 0
Wet Contact Sink/source
On Voltage Level +1 VDC Max.
Off Voltage Level +4 ~ 30 VDC
Counters Max Count 65535 (16-bit)
Max. Input Frequency 100 Mhz
Min. Pulse Width 5 ms
Input Impedance 3 kΩ
Overvoltage Protection +/-35 VDC

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left