> Data Acquisition > Remote I/O Data Acquisition > Modbus RTU Based Data Acquisition > M-7000 Modbus RTU Remote Data Acqui... > M-7055

> Data Acquisition > Remote I/O Data Acquisition > DCON RS-485 Data Acquisition > M-7000 Modbus RTU Remote Data Acqui... > M-7055

8 Channel Isolated Digital Input (Counter, Dry Contact: Source, Wet Contact: Sink or Source) and 8 Channel Isolated Digital Output (Source) Data Acquisition Module, communicable over Modbus RTU and RS-485, supports operating temperatures from -25 ~ 75°C

M-7055

1 Customer Review(s)

write a review write a review

8 Channel Isolated Digital Input (Counter, Dry Contact: Source, Wet Contact: Sink or Source) and 8 Channel Isolated Digital Output (Source) Data Acquisition Module, communicable over Modbus RTU and RS-485, supports operating temperatures from -25 ~ 75°C

Price: $249.00

Fastest Delivery:

Qty:

Compare

Compare: 0

ADD TO CART

BUY BY 1-CLICK

Email Product Details Write a Review Write a Review Email Us

References and Support Add to Quote

References & Support

Features

The M-7055 device is a network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.

Communication Interface: RS-485
Short Circuit Protection
Direct drive power relay module
Din Rail Mount
Digital Input Channels: 8
Digital Output Channels: 8
D/I can be used as counter channels: 8

Specifications

Digital Input
Channels	8
Input Type	Dry Contact: Source, Wet Contact: Sink or Source
Dry Contact Level	Off Voltage Level : Open
Dry Contact Level	On Voltage Level : Close to GND
Wet Contact Level	Off Voltage Level : +4V max.
Wet Contact Level	On Voltage Level : +10 V ~ +50 V
Input Impedance	10K Ohms, 0.5W
Counters	channels : 8
	Max. Counts: 16-bit (65535)
	Max. Input Frequency : 100Hz
	Min. Pulse Width : 5ms
Photo-Isolation	3750 VDC
Digital Output
Channels	8, Source, NMOS
Output Voltage	10 to 40V max
Output Current	650mA per channel, Direct drive power relay module
Overvoltage Protection	47 VDC
Overload Protection	Yes
Short-circuit and Overcurrent Protection	Yes, 1.4 A
Thermal Overload trip temperature	150°C
4KV ESD Protection (IEC 61000-4-2)	Yes, contact for each terminal
Intra-module Isolation, Field to Logic	3750 Vrms
Interface
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200bps
LED Display
1 LED as Power/ Communication indicator
8 LEDs as Digital Input indicators and 8 LEDs as Digital Output indicators (for M-7055D)
Power
Input Voltage Range	10 ~ 30 VDC
Power Consumption	1.2W (M-7055)/2.2W (M-7055D)
Protocol
Support Modbus and DCON Protocol	Yes
Environment
Operating Temperature	-25 ~ 75°C
Storage Temperature	-40 ~ 85°C
Humidity	5 ~ 95% RH, non-condensing