M-7050
7 Channel Digital Input (Source) and 8 Channel Digital Output (Sink) Data Acquisition Module communicable over Modbus RTU and RS-485, supports operating temperatures from -25 to 75°C
Features
The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
- Communication Interface: RS-485
- Digital Input Channels: 7 (Sink)
- D/I can be used as counter
- Digital Output Channels: 8 (NPN, Sink)
- Din Rail Mount
Specifications
Digital Input | |
Channels | 7 |
Input Type | Source, non-isolated channel with common ground |
Off Voltage Level | +1V max. |
On Voltage Level | +4V ~ +30V |
Input Impedance | 3K9, 0.3W |
Counters | channels : 7 |
Max. Counts: 16-bit (65535) | |
Max. Input Frequency : 100Hz | |
Min. Pulse Width : 5ms | |
Digital Output | |
Channels | 8, Sink, NPN |
Output Voltage | 30V max. |
Output Current | 30mA max. |
Interface | |
Interface | RS-485 |
Format | N, 8, 1 ( |
Baud Rate | 1200 ~ 115200bps |
LED Display | |
1 LED as Power/ Communication indicator | |
7 LEDs as Digital Input indicators, and 8 LEDs as Digital Output indicators (for M-7050D) | |
Power | |
Input Voltage Range | 10~30VDC |
Power Consumption | 0.4W (M-7050) / 1.1W (M-7050D) |
Protocol | |
Support Modbus and DCON Protocol | Yes |
Environment | |
Operating Temperature | -25 to 75°C |
Storage Temperature | -40 to 85°C |
Humidity | 5 to 95% RH, non-condensing |