M-7041D
14 Channel Isolated Digital Input Counter Data Acquisition Module, communicable over Modbus RTU and RS-485 with Display, supports operating temperatures from -25°C ~ +75°C (-13°F ~ +167°F)
Features
The M-7041D device is a network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
- Digital Input Channels: 14
- Display LED:
- 4 1/2 digit LED display ( MI-7016D)
- Digital input status
- Isolated channel with common power
- D/I can be used as counter
- Communicatble via Modbus protocol
- Communication Interface: RS-485
- Din Rail Mount
Specifications
Communication | |
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200 bps |
Logic level 1: +3.5 to 30V | |
Protocol | DCON |
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) |
LED Indicators/Display | |
System LED Indicator | Yes, 1 LED as Power/Communication Indicator |
I/O LED Indicators | - |
7-Segment LED Display | Yes, 14 LEDs as Digital Input Indicators |
Isolation | |
Intra-module Isolation, Field-to-Logic | 3750 VDC |
EMS Protection | |
ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal |
±8 kV Air for Random Point | |
EFT (IEC 61000-4-4) | ±2 kV for Power Line |
Surge (IEC 61000-4-5) | - |
Power | |
Reverse Polarity Protection | Yes |
Input Range | 10 ~ 30 VDC |
Consumption | 0.2 W |
Mechanical | |
Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm |
Installation | DIN-Rail or Wall Mounting |
Environment | |
Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature | -40°C ~ +85°C (-40°F ~ +185°F) |
Humidity | 10 ~ 95% RH, Non-condensing |
I/O Specifications
Digital Input/Counter | ||
Channels | 14 | |
Type | Dry Contact | - |
Wet Dry | Sink/Source | |
Wet Contact | On Voltage Level | +4 ~ 30 VDC |
Off Voltage Level | +1 VDC Max. | |
Dry Contact | On Voltage Level | - |
Off Voltage Level | - | |
Effective Distance for Dry Contact | - | |
Counters | Max. Count | 65535 (16-bit) |
Max. Input | 100 hz | |
Min. Pulse Width | 5 ms | |
Input Impedence | 3 KΩ | |
Chanell-to-Channel Isolation | - | |
Overvoltage Protection | ±35 VDC |