ICP DAS USA’s M-2017 is an Analog Input module that is equipped with 8 differential Analog Input channels. The module provides a programmable input range on all Analog Input channels, and each channel can be configured for an individual input range, providing a high overvoltage protection of 240 Vrms and 50mA overcurrent protection at 110 VDC/VAC. Voltage and current input is DIP switch selectable. The sampling rate for the M-2017 module is adjustable and can be configured to either fast or normal mode. The module also features per-channel open wire detection for current input of 4 to 20 mA, and provides 8 kV ESD protection, 4 kV EFT protection, 2 kV surge protection, and 3000 VDC intra-module isolation. The M-2017 module supports both the Modbus RTU and DCON protocols, which can be configured via software.
- 8-channel Differential Analog Input
- DIP Switch Selectable Voltage or Current Input
- 240 Vrms Overvoltage Protection
- Supports Fast and Normal Mode Sampling
- 4 kV ESD and EFT Protection
- Overcurrent Protection
- Individual Channel Configuration
- Dual Watchdog
- 3000 VDC Intra-Module Isolation, Field to Logic
- Wide Operating Temperature Range: -25°C to 75°C
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Yes, 1kΩ bias resistor by switch selectable
N81, N82, E81, O81
1200 to 115200 bps
Modbus RTU, DCON
Yes, Module (1.6 Seconds), Communication (Programmable)
System LED Indicator
Yes, 1 as Power/Communication Indicator
I/O LED Indicators
7-Segment LED Display
Intra-module Isolated, Field-to-Logic
ESD (IEC 61000-4-2)
8 kV Contact for each terminal and 16 kV Air Random Point
EFT (IEC 61000-4-4)
±4 kV for Power
Surge (IEC 61000-4-5)
±2 kV for power liner
Reverse Polarity Protection
Input Voltage Range
+10 ~ +48 VDC
Dimensions (L x W x H)
110 x 33 x 96 mm
-25°C to +75°C
-30°C to +80°C
10 ~ 95% RH, Non-condensing
±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (DIP switch selectable)
Normal Mode: 10 Samples/Sec. (Total)
Fast Mode: 60 Samples/Sec. (Total)
Normal Mode: ±0.1% of FSR
Fast Mode: ±0.5% of FSR
Common Voltage Protection
Yes, 50 mA at 110 VDC
Over Voltage Protection
Individual Channel Configuration
20-Pin Removable Terminal Block
Customers who bought this item also purchased the following items.
24V , 1A 24W Power S...
2.8-inch High Resolu...
USB to Isolated RS-2...
8 Channel Analog Inp...
8 Channel Voltage In...
8 Channel Voltage In...