The ICPDAS XP-8000, XP-8000-CE6, XP-8000-CE6-PRO, WinCon-8000, WP-8000, LinCon-8000, LP-8000, I-8000 and iP-8000 series modules are all Programmable Automation Controllers (PACs) that use an I-8172W FRnet communication module to implement an FRnet network. The I-8172W is an isolated FRnet communication controlers. The I-8172W has two FRnet ports, each FRnet port can control a maximum of 16 communication nodes, numbered from 0 to 15. Each single node of the remote I/O module can control a maximum of 16 DI/DO channels. In other words, each FRnet port can control a maximum of 128 DI and 128 DO channels.
- Industrial Automation
- Remote I/O control
- Building Automation
- Parking Lot Management
- Reduced Wiring two-wire cabling
- Innovative token-stream communication technology
- Real-time I/O synchronization capabilities
- Fixed cyclic scan time for deterministic control
- High speed distributed I/O control capabilities
- Memory-mapping I/O programming
- Easily programmable
- No software overhead for protocol processing
Reference & Support
|Number of ports||2|
|2-wire cabling||Belden 8941 (2P twisted-pair cable),
When different cables are used, the transmission distance may change
|Transfer distance||Max. 400m for speed 250Kbps (Default); Max. 100m for speed 1Mbps|
|Transfer speed||2.88ms for speed 250Kbps (Default)
0.72ms for speed 1Mbps
|Connection||Removable 5-Pin Terminal Block|
|Intra-module Isolation, Field to Logic||3000VDC|
|1 LED as Power Indicator|
|2 LEDs as Communication Run Indicators|
|Power Consumption||0.12A @ 5V = 6W ,+/- 5% For Hardware version 1.2|
|Operating temperature||-25 to 75°C|
|Storage temperature||-40 to 85°C|
|Humidity||5 to 95%, non-condensing|
|30mm x 102mm x 115mm (W x L x H)|
32-channel FRNet Iso...
16-channel FRNet Sin...
ViewPAC Touch Screen...
ISaGRAF based ViewPA...
WinPAC Programmable ...
16-channel Isolated ...