I-8142i
2 Port Isolated RS-422/485 Module. I-8142i is phased out and replaced by I-8142iW.
Features
The I-8142i has officially been phased out and will no longer be available. It has now been replaced by I-8142iW.
2 port Isolated RS-422/485 module
Specifications
Specifications | |
Number of ports | 2 |
Interface | Isolated RS-422/485 (The RS-422 and RS-485 couldn't be used simultaneously) |
Controller | 16C550 compatible |
Speed: 115200 bps Max. | |
Data bit: 5, 6, 7, 8 | |
Stop bit: 1, 1.5, 2 | |
Parity: None, Even, Odd, Mark, Space | |
FIFO: Internal 16 bytes | |
Self-Tuner Asic inside | Yes. |
Interrupt | Shared Interrupt |
Bus | Parallel I/O Module |
Supports Max devices | Supports 32 devices max by each port. For Hardware version 6.7 |
Connector | 10-Pin RJ-45 |
Photo-Isolation | 2500Vrms |
4KV ESD Protection | Yes, Contact for each port. |
Intra-module Isolation, Field to Logic | 3000VDC |
Software | |
Support interrupt driven software library | |
Support VxCOM library | |
LED Display | |
1 LED as Communication Indicator | |
2 LEDs as Communication(TxD) Indicators | |
2 LEDs as Communication(Error) Indicators | |
Power | |
Power Consumption | 0.48A @ 5V = 2.4W, +/- 5% For Hardware version 6.7 |
Environment | |
Operating Temperature | -25 to 75 °C |
Storage Temperature | -40 to 85 °C |
Humidity | 5 to 95%, Non-condensing |
Dimensions | |
31 x 63 x 114 (W x L x H) | |
Include cable | |
CA-RJ1003 x 1 |