The I-7510A provides 2-way optical isolation between one piece of RS-422/RS-485 equipment and the rest of the system. It can also be used as a repeater to extend the transmission of an existing network beyond 4000 feet. Additionally, an RS-485 system can be expanded beyond the 256 node limitation imposed by the standard. It can also be used to convert a four-wire RS-422 signal into a 2-wire RS-485 signal, and vice versa.
The I-7510AR is exactly the same as the I-7510A, except for the isolation site. The isolation site of the I-7510A is located in the input interface circuit, but the isolation site of the I-7510AR is located in the input and output interface circuit. In other words the I-7510AR is 3-way isolation repeater module.
- Auto Switching Baud Rate, 300 ~ 115200 bps
- ESD Protection for RS-485 Data Line
- 2-way 3000 VDC Isolation Protection for I-7510/I-7510A
- 3-way 3000 VDC Isolation Protection for I-7510AR
- Transmission Speed of up to 115200 bps
- Power Input of +10 ~ +30 VDC
- Supports Operating Temperatures from -25 °C ~ +75 °C
Reference & Support
|Serial Interface||RS-422||TxD+, TxD-, RxD+, RxD
The RS-422 and RS-485 cannot be used simultaneously
|2-wire cabling/4-wire cabling||Belden 8941 (2P twisted-pair cable)/Belden 8942 (4P twisted-pair cable), if different cables are used, the transmission distance may change|
|Transfer Distance||Max. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps|
|Max. Devices Supported||256|
|Self-Tuner Asic Inside||Yes|
|Speed||300 ~ 115200 bps|
|3000 VDC Isolated Voltage||2-way Isolated|
|Connection||Removable 10-Pin Terminal Block x 2|
|Input Voltage Range||+10 VDC ~ +30 VDC (Non-isolated)|
|Power Consumption||2.16 W|
|Flammability||Fire Retardant Materials (UL94-V0 Level)|
|Dimensions (W x H x D)||72 mm x 122 mm x 35 mm|
|Operating Temperature||-25 °C ~ +75 °C|
|Storage Temperature||-30 °C ~ +75 °C|
|Humidity||10 ~ 90% RH, non-condensing|
USB to RS-232 Conver...
RS-232 to RS-422,RS-...
Small Industrial Enc...
24V , 0.2A 4.8W Powe...
24V , 1.7A 40.8W Pow...