Learn about our USB converters that function as signal conversion from USB to RS-232/422/485 or CAN industrial data communication. We offer serial, RS-485/232/422 USB converters.
Our Converter & Gateway devices allow for communication and conversion between varieties of protocols, including BACnet, CAN bus, DALI, DeviceNet, HART, and more.
The TDS-700 series are Serial-to-Ethernet device servers that add Ethernet and Internet connectivity to any RS-232/422/485 device. Virtual COM ports are set up with the VxComm Driver/Utility so the built-in COM port of the TDS-700 series can be virtualized to a standard PC COM port in Windows.
The TGW-700 series are Modbus TCP to RTU/ASCII gateways that enable a Modbus TCP master to communicate with serial Modbus RTU/ASCII devices through an Ethernet network. The series eliminates the cable length limitation of legacy serial communication devices.
Learn about the tSH-700 series that performs serval functions such as baud rate conversion, Modbus RTU/ASCII conversion, and acts as a Two Masters Share One Slave device. The tSH-700 series has a built-in web server, which eliminates the need for command-line console interaction.
We offer RS-485 high-speed I-7510 repeaters to ensure signal strength and quality over long distances. With our RS-485 repeaters, an RS-485 system can be expanded beyond the 256 node limitation imposed by the standard. The RS-485 repeaters can also be used to convert a four-wire RS-422 signal into a 2-wire RS-485 signal, and vice versa.
Ethernet/IP uses all the transport and control protocols of standard Ethernet including the Transport Control Protocol (TCP), the User Datagram Protocol (UDP), the Internet Protocol (IP) and the media access and signaling technologies found in off-the-shelf Ethernet technology. Building on these standard communication technologies means that Ethernet/IP works transparently with all the standard Ethernet devices found in today's market-place.
USB Data Acquisition Modules are Easy to use, support plug and play and plug right into your USB port on your computer. They are being used in building, manufacturing, machine, data acquisition control, and monitoring applications.
BACnet is a communication protocol for building automation and control networks. BACnet is designed to allow communication for applications such as heating, ventilating, and air-conditioning control, lighting control, access control, and fire detection systems and their associated equipment.
ICP DAS USA provides HART Gateways for conversion of HART to RS-232/422/485, Modbus RTU and Modbus TCP protocols and interfaces. The HART (Highway Addressable Remote Transducer) protocol uses the Frequency Shift Keying (FSK) standard to superimpose digital communication signals on the 4-20 mA loop current.
The AR-200/AR-400 series is a range of high-performance dynamic signal acquisition modules that are designed specifically for vibration monitoring and analysis. The maximum simultaneous sampling rate for each channel on the AR-200 and AR-400 is up to 200k-Hz and 125k-Hz respectively. The AR-200/AR-400 modules include a built-in 3mA excitation current to power the Integrated Electronics Piezo-Electric (IEPE) accelerometers and a 16-bit A/D converter. The data acquired by the AR-200/AR-400 is saved on a Micro SD card that can be used for offline vibration analysis.
CANOpen is a network protocol based on CANBus and we offer CANOpen data acquisition modules in Counter, PWM, Analog Output, Digital Input and Digital Output. CANopen is a kind of network protocol based on CAN bus and has been used in various applications, such as vehicles, industrial machines, building automation, medical devices, maritime applications, restaurant appliances, laboratory equipment & research.
The NS-205 is a compact, robust and durable 5-port industrial Ethernet switch. It has 5 Ethernet switching ports that support 10/100 Base-TX, with 10/100M auto-negotiation and an auto MDI/MDI-X function. It is very easy to use with plug-and-play. Through its 5 ports it can connect with 5 workstations and automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LED indicators for each port, which makes it easy to trouble-shoot. Port connectors are shielded RJ-45. It contains "soft start" function with overload protection and high-low voltage protection.