Download Now

Enter your information or login to view the document.

*For Multi Mode Use* Unmanaged 4 Port Industrial 10/100 BaseT Ethernet with Dual 100 BaseFX Fiber Optic Switch with SC Connector


*For Multi Mode Use* Unmanaged 4 Port Industrial 10/100 BaseT Ethernet with Dual 100 BaseFX Fiber Optic Switch with SC Connector

  Price:  $659.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.


The NSM-206FC (SC Connector; Multi-mode) is an unmanaged, 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It uses Ethernet for transmitting a signal up to 2Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The NSM-206FC operates at either half or full duplex mode. In full duplex mode, range is 2Km with 62.5/ 125μm fiber cables; in half duplex mode it's range is 412m with 62.5/ 125μm fiber cables. The NSM-206FC can extend your LAN in a daisy chain configuration. Please refer to User's Manual" target="_blank">User's Manual. NSM-206FC provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-206FC's power needs.

  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 1.6 Gbps high performance memory bandwidth
  • Redundant Power Inputs +10 ~ +30V DC
    • Power failure alarm by relay output
  • Supports operating temperatures from 0°C ~ +70°C
  • IP20, rugged high-strength metal case
  • DIN-Rail; Wall Mounting


  • Compatibility : IEEE 802.3, IEEE802.3u, IEEE802.3x
  • Frame buffer memory : 256 Kbit
  • Address Table Size : 1K uni-cast addresses
  • Interface : 10/100 Base-T(X) and 100 Base-FX(SC Connector; Multi-mode)
  • Ethernet Port : 10/100 Mbps x 4
  • Fiber Optic Port : 100 Mbps x 2 (SC Connector)
  • Provides LEDs for network and power monitoring
  • ESD Protection :
    • 4 KV Contact Discharge
    • 8 KV Air-Gap Discharge
  • Fiber Optic Transmission distance :
    • Multi mode fiber cables : 50/125, 62.5/125 or 100/140 μm
    • Distance : 2 km, 1300 ~ 1310 nm (62.5/125 μm)
    • Min. TX Output : -20 dBm
    • Max. TX Output : -14 dBm
    • Sensitivity : -34 to -31 dBm
  • Ethernet Cables :
    • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
    • 100 Base-TX (Cat.5 UTP cable; 100m Max.)
  • General Environment :
    • Operating temperatur : 0°C ~ +70°C
    • Storage Temperature: -20 ~ +85°C
    • Relative Humidity: 10% to 90% non-condensing
  • Dimensions : 72.5mm x 110mm x 104mm (W x H x D)
  • Power requirements : +10 to 30Vdc (Removable Terminal Block)
  • Alarm Contact: One relay output with current carrying capacity of 2A @ 30 VDC
  • Power consumption : 0.24A@24Vdc (± 5%, arrowed)

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items


Write a Review




Rating: out of 5 Stars
Review (max 1000 characters)

characters left