5-Port 10/100 Mbps PoE (PSE) Ethernet Switch in metal case with 12 VDC Input. Provides up to 4 watts of PoE power per port.  Supports operating temperatures from -40°C ~ +75°C.  This product has been phased out and replaced by NS-205PSE-24.

NSM-205PSE-12-4W

5-Port 10/100 Mbps PoE (PSE) Ethernet Switch in metal case with 12 VDC Input. Provides up to 4 watts of PoE power per port. Supports operating temperatures from -40°C ~ +75°C. This product has been phased out and replaced by NS-205PSE-24.

    Item Not Available  


References & Support


Features

NSM-205PSE-12V-4W is a 5-port unmanaged PoE (Power-over-Ethernet) Industrial Ethernet switch that has 4 PoE ports which are classified as power source equipment (PSE). The NSM-205PSE-12V-4W provides up to 4 watts of power per PSE port.

The NSM-205PSE-12V-4W is designed with a 12 VDC to 48 VDC boost for PoE applications where a 48 VDC power supply is not available.

  • Automatic MDI/MDI-X crossover for plug-and-play
  • Each port supports both 10/100Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 4 PoE ports with Power Sourcing Equipment (PSE) operation
  • Auto-detection of PD (powered devices) and automatic power management
  • Over-temperature, over-current and over/under-voltage detection
  • Power Input +12 VDC
  • Supports operating temperatures from –40 ~ +75°C
  • DIN-Rail

Specifications

Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act , Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
Power Input
Input Voltage Range +12 ~ +24 VDC
Power Consumption 0.3A@ 12 VDC without PD loading; 2.2A@ 12 VDC with PD full loading
Protection Reverse Polarity Protection
Connection 3-Pin Removable Terminal Block
PoE Output
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment))
PoE Voltage +48 VDC depending on power input
PoE Power Up to 4 watts per Ethernet port
PoE Operation Automatic detection and power management
Mechanical
Casing Metal (IP30 Protection)
Dimensions (W x L x H) 25 mm x 168 mm x 119 mm
Installation DIN-Rail
Environmental
Operating Temperature -40°C ~ +75°C (-40°F ~ +167°F)
Storage Temperature -40°C ~ +85°C (-40°F ~ +185°F)
Ambient Relative Humidity 10% ~ 90% RH, non-condensing

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left