Features
The ISO-AD32H/L ( H for high gain / L for low gain ) is a bus-type isolated 12-bit A/D board for PC/AT compatible computers. The isolation inputs can operate with up to 500Vrms of common-mode voltage. The ISO-AD32H/L features a 200KHz 12-bit analog-to-digital converter, on board 1K byte FIFO buffer, and 32 singled-ended or 16 differential analog input channels. The analog input allows auto-channel /gain scan . This board supports gap-free A/D conversion at 200KHz sampling rates for single channel or 100KHz sampling rates for channel scan . The "Hands-Off" design permits all board parameters (channel selection, gain, input type, and operating mode) to be performed with software . Once installed, you will never have to configure it again.
- Fast Speed -- up to 200KHz
- Sampling rate can be programmable
- On board FIFO buffer supports gap-free A/D conversion
- High channel count input can be implemented in half size
- 32 single-ended or 16 differential input channels, 500Vdc photo-isolation protection
- Maximum 200K 12-bit sampling rate
- Built-in 1K byte FIFO
- Auto-channel / gain scan
- Command set programming
- Gap-free A/D conversion
- Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- Toolkit for Labview 95/98
- Toolkit for Labview NT
- Toolkit for Labview 2000/XP
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Toolkit for LINUX
- Toolkit for DasyLab
Specifications
- Analog Input
- Channels: 32 single-ended / 16 differential
- Resolution: 12-bit
- Conversion rate: 200KS/s max.
- Input impedance: 10000M Ohm // 6pf
- Overvoltage protection: +/- 35V
- Accuracy: 0.01% of reading +/- 1-bit
ISO-AD32H Input Range
Gain | Bipolar(V) | Unipolar |
Throughtput |
.5 | ±10 | 125K/s | |
1 | ±5 | 0 ~10 | 125K/s |
5 | ±1 | 80K/s | |
10 | ±0.5 | 0 ~ 1.0 | 80K/s |
50 | ±0.1 | 10K/s | |
100 | ±0.05 |
0 ~ 0.1 | 10K/s |
500 | ±0.01 | 1K/s | |
1000 | ±0.005 | 0 ~ 0.01 | 1K/s |
ISO-AD32H Input Range
Gain | Bipolar(V) | Unipolar |
Throughtput |
.5 | ±1 | 200K/s | |
1 | ±5V | 0 ~ 10 | 200K/s |
2 | ±2.5 | 0 ~ 5 | 200K/s |
4 | ±1.25 | 0 ~ 2.5 | 200K/s |
8 | ±0.0625 | 0 ~ 1.25 | 200K/s |
- General Environment:
- Power Requirements: +5V @850mA max.
- Operating temp 0° - 50°C
- Storage temp -20°C - 70°C
- Humidity 0 to 90% non-condensing
- Dimensions 173 mm x 122 mm