8-channel Isolated Analog Output Redundant Module for DCS systems, supports operating temperatures from -25°C ~ +75°C

F-8028CV

8-channel Isolated Analog Output Redundant Module for DCS systems, supports operating temperatures from -25°C ~ +75°C

  Price:  $1,499.00  

Features

The F-8028CV is a 16-bit, 8-channel analog output module that features programmable output range on all channels. It provides digital to analog conveter controlled by the system module to convert the digital data into output signals. Users can specify the start up and safety value through configuration software. Moreover, this module has ±0.05% accuracy for highly accurate application. Besides, the F-8028CV provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

  • 8 current/voltage output channels
  • Overrange output
  • Short circuit protection
  • Open wire detection
  • RoHS compliance
  • 3000 VDC isolation from output to backplane
  • 3000 VDC isolation from output to frame ground
  • Redundancy
  • Fast redundant switching time (<1 ms)

Applications

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment

Specifications

Feature
Redundant Yes (Switching time < 1 ms)
Termination board break off detection Yes
Short Circuit Protection Yes
Open Wire Detection Yes (4 ~ 20 mA)
Power-On Value Yes
Safety Value Yes
LED indicator 1 RUN, 1 ACT, 1 DUX
Analog Output
Number of channels 8
Type 0 ~ 20 mA, 4 ~ 20 mA (current sourcing)
0 ~ 5 V, ±5 V, 0 ~ 5 V, ±10 V
Maximum Allowable Output Range 0 ~ 20 mA +20% (0 ~ 24 mA)
4 ~ 20 mA ±25% (0 ~ 24 mA)
0 ~ 5 V +20% (0 ~ 6 V)
±5 V ±20% (±6V)
0 ~ 5 V +20% (0 ~ 12 V)
±10 V ±20% (±12V)
Resolution 16 bit
Output Response Time <200 μS
Accuracy ±0.05% FSR
Zero Drift ±0.2 μV/℃
Span Drift ±25 ppm/℃
Output Capacity Current 750 Ω
Voltage 500 Ω
Data Range -2500 ~ 12500
Isolation 3000 VDC
Certification
EMC EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board DN-AIO-M
Maximum power consumption 1 W
Operating temperature -25°C ~ +75°C
Humidity 5 ~ 95 % RH, Non-condensing
Weight 300 g
Dimensions (W x L x H) 30 mm x 85 mm x 115 mm