The EIP-2000 is an industrial remote I/O module series supporting the EtherNet/IP protocol. Users can seamlessly integrate these modules into the Ethernet network from the industrial floor to the enterprise. The EIP-2000 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. All the modules can be deployed in the network topologies such as star, line or ring. The isolation design protects the EIP-2000 against the harmful interference.
The EIP-2060 is a remote digital I/O module with 6 DIs and 6 Relay. It is designed as an EtherNet/IP adapter. Users can obtain the I/O status as well as the connection status of the EIP-2060 by the LEDs. In addition, ICPDAS provides software utility to easily configure and test the EIP-2000 modules via Ethernet.
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis
- Testing Equipment
- Transfer protocol: EtherNet/IP
- Powerful 32-bit MCU handles efficient network traffic
- 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
- Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
- Easy firmware update via Ethernet
- Removable terminal block connector
- LED indicators to display the I/O status
- Built-in I/O
- DI/Counter: 6 Channels
- Relay: 6 Channels
- Power-On Value
- Safe Value
- RoHS compliant
ICP DAS provides the EIP-2000 configuration utility for Windows 2K/XP/Vista and Win 7.
- Network parameters configuration
- Settings for power-on value and safe value
- DI counters inspection
- Easy test to transmit/receive the I/O status by EtherNet/IP
- Setting files management
Reference & Support
|Input Type||Dry Contact: Source, Wet Contact: Sink / Source|
|Dry Contact Level||Off Voltage Level: Open
On Voltage Level: Close to GND
|Wet Contact Level||Off Voltage Level: +4V max.
On Voltage Level: +10 V ~ +50 V
|Max. Counts||32-bit (4294967295)|
|Max. Input Frequency||5KHz|
|Output Type||Form A(SPST-NO)|
|Contact Rating(Resistive Load)||5A 250VAC (47~63Hz)
5A 30 VDC
|Operate Time||10ms max.|
|Release Time||5ms max.|
|Insulation Resistance||1,000MΩs at 500 VDC|
|Dielectric Strength||Between Open Contact||1000VAC (1 min.)|
|Between Coil and Contacts||3000VAC (1 min.)|
|Endurance||Mechanical||20,000,000 times min.|
|Electrical||100,000 times min.|
|Connector||10/100 Base-TX, 8-pin RJ-45 x 2
Support daisy chain connection
|Standard Supported||IEEE 802.3 Ethernet/IP|
|Input Voltage Range||10V ~ 30V|
|Dimensions||110mm x 90mm x 33mm (H x W x D)|
|Operating Temperature||-25℃ ~ +75℃|
|Storage Temperature||-30℃ ~ +80℃|
|Humidity||10 ~ 90% RH, non-condensing|
Modbus TCP Based Eth...
Ethernet,IP adapter ...
Isolated 8 channel D...
Isolated 16 channel ...
24V , 0.25A 6W Power...
Isolated 16 Channel ...