CAN-Logger100
1-port CAN Bus Data Logger. Compatible with CAN specification 2.0 A and B. Supports SD card and SDHC. Powered by USB and M12 connectors. Includes free utility and software. Supports operating temperatures of -25 ~ 75 ℃(-13F ~ 167F).
References & Support
Features
The CAN-Logger100 is a high-performance smart CAN bus data logger with one CAN port that can help collect data and process on a CAN bus network easier and quicker. The powerful CPU of the CAN-Logger devices provide the accurately time-stamp for each CAN message and support storage media like SD card or SDHC type flash to save CAN messages, which helps users easily analyze and diagnose the CAN Bus network. Providing great portability, the CAN-Logger100 is powered by USB interface or M12 connectors of CAN bus interface. The CAN-Logger100 device uses the standard USB HID driver of the Windows system.
- Compatible with CAN specification 2.0 parts A and B
- 2500 Vrms photocoupler isolation on the CAN side
- Fully compatible with the ISO 11898-2 standard
- Supports CAN bus acceptance filter configuration
- Maximum CAN data flow for a single channel is 15000 fps
- Programmable CAN bus baud rate from 10 kbps ~ 1Mbps
- USB 2.0 High Speed Compatibility
- Supports 4 to 32 GB SDHC type flash to save CAN messages
- Built-in jumper for the 120 Ω terminal resistor of the CAN side
- Power by the USB port or CAN port
- 3 kV galvanic isolation for the CAN port
- Provides a configuration utility that can be used to transmit/receive CAN messages
Software
- CAN 2.0A or CAN 2.0B specification selection
- CAN Bus baud rate and acceptance filter configuration
- Easy to transmit/receive CAN messages and check CAN Bus state
- CAN Bus communication mode (normal and silent mode ) configuration
- Data filter function for logged data
Applications
- Automobile
- Control System
- Building Automation
- Factory Automation
- Distributed data acquisition
Specifications
CAN Interface | |
Transceiver | NXP TJA1042 |
Channel Number | 1 |
Connector | 5-Pin male M12 x 1 (Pin 1: F.G., Pin 2: +Vs, Pin 3: GND, Pin 4: CAN_H Pin 5: CAN_L) |
Transmission Speed (bps) | 10 k, 20 k, 50 k, 100 k, 125 k, 250 k, 500 k, 800 k, 1 M and user-defined baud rate |
Terminator Resistor | DIP switch for the 120 Ω terminator resistor |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler |
Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
CAN Filter Configuration | Utility tool |
USB Interface | |
Connector | USB Type B x 1 |
Compatibility | USB 2.0 High Speed |
Max. Data flow | Transmit: 4000 fps ; Receive: 1000 fps |
Software Driver | Windows 2K/XP/7/8/10 |
Data Logger Capability | |
Storage Media | SDHC type flash – support 4 to 32 GB |
Recording Format | Binary |
Time Stamp | 10 us |
Configuration | Utility tool |
Data Logger | Maximum message rate, receive: 15000 msgs/s |
Trigger | Log continuously |
LED | |
Round LED | Power, MS, SD, CAN1, CAN2, CAN_ST LEDs |
Power | |
Power supply | USB power or CAN bus power (Unregulated +10 ~ +30 VDC) delivery |
Protection | Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption | 0.1 @ 24VDC |
Mechanism | |
Installation | DIN-Rail mount |
Casing | Metal |
Dimensions | 102.0 mm x 102.0 mm x 44.0 mm (W x L x H) |
Environment | |
Operating Temperature | -25 °C ~ +75 °C |
Storage Temperature | -30 °C ~ +80 °C |
Humidity | 10 ~ 90% RH, non-condensing |