PISO-730 (current sourcing)
32 Channel TTL-level Digital I/O, 16 Channel Optically Isolated Digital Input and 16 Open-Collector Digital Output Board (Current Sourcing). Includes CA-4002 D-Sub connector
Features
***This Product has been phased out and replaced by PISO-730AU ***
The PISO-730A provides 32 channels isolated digital I/O (16 DI and 16 DO) and 32 channels TTL-level digital I/O (16 DI and 16 DO). Each digital output offers a PNP transistor and integral suppression diode for inductive load. The board interface to field logic signals, eliminating ground-loop problems and isolating the host PC from damaging voltages. Its isolated I/O channels provide up to 3750Vdc of protection.
The PISO-730A has one 37-pin D-type connector and two 20-pin flat-cable connectors. The flat-cable can be connected to ADP-20/PCI adapter. The adapter can be fixed on the chassis. It can be installed in a 5V PCI slot and can support truly "Plug and Play"
- PCI Bus
- 16 isolated DI/DO channels
- 32 TTL-level DIO channels (16 x DI & 16 x DO)
- DC/DC converter built-in
- One DB-37 D-type connector for isolation input and output
- Two separate 20-pin connectors for non-isolated input and output channels.
- 3750Vdc isolation voltage
- n Interrupt: 2 channels
- 5V PCI board
Software
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Toolkit for LINUX
- Toolkit for DasyLab
Applications
- Factory automation
- Product test
- Laboratory automation
Specifications
Digital Input | ||
Isolation Voltage | 3750 Vrms | |
Channels | Isolated | 16 |
Non-Isolated | 16 | |
Compatibility | Isolated | Optical |
Non-Isolated | 5 V/TTL | |
Input Voltage | Isolated | Logic 0: 0~1 V Logic 1: 9 ~ 24 V (Logic 1: Min. 7 V; Max. 30 V) |
Non-Isolated | Logic 0: 0.8 V max. Logic 1: 2.0 V min. |
|
Input Impedance | 1.2 KΩ, 1 W | |
Response Speed | Isolated | 4 kHz (Typical) |
Non-Isolated | 1.2 MHz (Typical) | |
Digital Output | ||
Isolation Voltage | 3750 Vrms | |
Channels | Isolated | 16 |
Non-Isolated | 16 | |
Compatibility | Isolated | Sink, Open Collector |
Non-Isolated | 5 V/TTL | |
Output Voltage | Non-Isolated | Logic 0: 0.4 V max. Logic 1: 2.4 V min. |
Output Capability | Isolated | 100 mA/+30 V for one channel @ 100% duty |
Non-Isolated | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
|
Response Speed | Isolated | 4 kHz (Typical) |
Non-Isolated | 1.2 MHz (Typical) | |
General | ||
Bus Type | 5 V PCI, 32-bit, 33 MHz | |
Data Bus | 8-bit | |
Card ID | No | |
I/O Connector | Female DB37 x 1 20-pin box header x 2 |
|
Dimensions (L x W x D) | 180 mm x 105 mm x 22 mm | |
Power Consumption | 640 mA @ +5 V | |
Operating Temperature | 0 ~ 60 °C | |
Storage Temperature | -20 ~ 70 °C | |
Humidity | 5 ~ 85% RH, non-condensing |