WP-8837

Windows CE 5.0

3.5

FTP Server, Web Server

FTP Server, Web Server

Options: MS eVC++ 4.0 or VS.NET 2005/2008 (VB.NET, C#.NET)

PC running Internet Explorer can monitor/control PAC via Internet/modem

Support three levels username and password protection. (high/middle/low)

PXA270, 520 MHz

128 MB

512 KB; data valid up to 5 years (for retain variables)

128 MB

16 KB

microSD socket with one microSD card (support up to 32 GB)

Provide second, minute, hour, date, day of week, month, year

Yes, for Software Copy Protection

Yes

1

Yes (0 ~ 9)

Yes (8 bits)

Yes
640 x 480, 800 x 600, 1024 x 768

RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, LED indicators)

2

Internal communication with the high profile I-87K series modules in slots

RS-232 (to update firmware) (RxD, TxD and GND); non-isolated

RS-485 (Data+, Data-) with internal self-tuner ASIC;
2500 VDC isolated for WP-8137 and WP-8147; 3000 VDC isolated for other models.

Yes
RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232; Data+ and Data- for RS-485); non-isolated

Yes
RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated

8
Note: For High Profile I-8K and I-87K Modules Only

95 mm x 132 mm x 111 mm: WP-8137, WP-8147
231 mm x 132 mm x 111 mm: WP-8437, WP-8447
355 mm x 132 mm x 111 mm: WP-8837, WP-8847

DIN-Rail or Wall Mounting

-25 ~ +75 °C

-30 ~ +80 °C

10 ~ 90 % RH (non-condensing )

+10 ~ +30 VDC

1 kV

Yes, with one power relay (1 A @ 24 VDC) for alarm

25 W

9.6 W

1 ~ 255, User-assigned by software

Link to a max. of 100 devices that support the Standard Modbus TCP/IP Slave protocol

A max. of 10 ports: COM1 ~ 14 (*). (To connect to other Modbus Slave devices) Support Multi-ports.

A max. of 5 ports: COM1, one of COM2/3, COM4 ~ 8 (*). (For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.)

Two Ethernet ports (LAN1 & LAN2) support up to 32 connections. If the PAC uses 1 connection to connect each PC/HMI, it can connect to up to 16 PCs/HMIs; If the PAC uses 2 connections to connect each PC/HMI, it can connect to up to 32 PCs/HMIs; If one of the Ethernet port malfunctions, the other one can still be used to connect to the PC/HMI.

Ethernet Ports for connecting a PC running Internet Explorer.

Custom protocols can be applied at COM1~14 using Serial communication function blocks. (*)

One of COM2 ~ 3 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 255 I-7000/87K remote I/O modules can connect to one PAC.

A max. of 10 RS-485 ports (COM1 ~ 14) (*) can support M-7000 I/O.
Each port can connect up to 32 M-7000 Modules.

LAN2 supports ICP DAS Ethernet I/O: I-8KE4-MTCP and I-8KE8-MTCP. If LAN2 malfunctions, it will automatically switch to LAN1 to continuously work. (The IP address for LAN1 and LAN2 should be set in the same IP domain).

Enable a max. of 8 pcs. I-8172W boards in slot 0~7 to be used to connect to FRnet I/O modules, such as FR-2053, FR-2057, FR-32R, FR-32P. Each I-8172W board can link to a max. of 256 DI plus 256 DO channels.

Provide functions to send email with a single attached file via the Ethernet port.

Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port. (LAN2 Port only)

WP-84x7/88x7’s COM4/5 and WP-81x7’s COM1/COM5 can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone. (*) Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)

COM4 or COM5 supports the ICP DAS MMICON. (*)

LAN1 or LAN2 supports the UDP Server and UDP Client protocols allowing messages to be sent/received to/from a PC/HMI or other device. For example, data can be automatically reported to the InduSoft's RXTX driver.

LAN1 or LAN2 supports the TCP Client protocol allowing messages to be sent/received to/from a PC/HMI or other device that supports the TCP server protocol. Ex: automatically report data to InduSoft's RXTX driver, or to connect a location camera.

Enable the I-8212W (2G/3G) card allowing short messages to be sent/received to/from or to access a dial up connection to link to the Internet and using a GPRS connection to send an email or communicate with remote stations using the "FTP Client" or the "TCP Client"/"UDP Server"/"UDP Client" protocols.

Support for the SQL Client function that allows data to be written (or read from) a Microsoft SQL Server (2000 SP3, 2005, 2008).

This redundant system has setup two "Active IP" address point to the active LAN1 and LAN2 ports always. One or more PC/HMI/SCADA can communicate with this redundant system via one of the two given active IP. So the PC/HMI/SCADA can access to the system easily without any notice about which WP-8xx7 is currently active.
Moreover, the new redundant system can integrate with the RU-87P4/87P8 Expansion Unit plus the I-87K high-profile I/O cards to support the hot-swap application. If the I/O card is damaged, the maintenance person just takes one good-card with same model number to hot-swap the damaged one without stopping this redundant system.

COM1, COM3 ~ COM14 (*) can connect to one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One WP-8xx7 supports a max. of 10 RS-232 ports to connect a max. of 10 I-7530.

Enable the I-8123W CANopen Master card to connect to other CANopen Slave devices.

Enable I-87H17W modules in slots 0 to 7 used to communicate with other HART devices.

Enable the FTP Client to upload files from the PAC to a remote FTP server on a PC.

Provide support for the eLogger HMI. The user can design the HMI screen using the eLogger on the PC and then download it to the PAC to display the HMI on the PAC.