Configurable I/O Controller with 4 Analog Inputs, 4 Analog Outputs, 4 Digital Inputs and 2 Ethernet ports. Supports Modbus TCP and can send email alarms based on configurable conditions.  Support IF-Then Else type logic rules.

WISE-7504M

Configurable I/O Controller with 4 Analog Inputs, 4 Analog Outputs, 4 Digital Inputs and 2 Ethernet ports. Supports Modbus TCP and can send email alarms based on configurable conditions. Support IF-Then Else type logic rules.

  Price:  $869.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.

Features

WISE-7504M is a multi-function module with 4-channel analog inputs, 4-channel analog outputs and 4-channel digital inputs module. WISE-7540M provides multiple programmable analog inputs, and analog outputs. Each of its analog inputs can configure a proper range of 240 Vrms high voltage protection. WISE-7504M follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification, allowing it to receive power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7504M is equipped with two-port ethernet switch to implement daisy-chain topology; reducing the cost and allowing easy cabling. By integrating with IF-THEN-ELSE rule engine, WISE-7504M provides more powerful functions such as I/O Moniitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7504M also supports Modbus TCP and MQTT protocol to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

  • Runs on browsers, no extra software tool is required.
  • No more programming, Web pages provided for control logic editing.
  • IF-THEN-ELSE logic rules execution ability.
  • Built-in I/O (AI: 4 Channels; AO: 4 Channels; DI: 4 Channels)
  • Support I/O Moniitoring/Control, Counter, Timer, Schedule, Email sending and CGI Command sending operations.
  • Modbus TCP Protocol for SCADA System Integration.
  • IEEE 802.3af-compliant Power over Ethernet (PoE).
  • 2-port Ethernet Switch for Daisy-Chain Topology.
  • MQTT Protocol for IT & IoT (Internet of Things) System Integration.

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Reference & Support

Specifications

Analog Input

Channels

4 (Differential)

Type

±500 mV, ±1 V, ±5 V, ±10 V, +0 mA to +20 mA, ±20 mA, 4 to 20 mA (Jumper Selectable)

Resolution

16-bit

Sampling Rate

10 Samples/Second (Total)

Accuracy

±0.1 %

Zero Drift

±20 μV/°C

Span Drift

±25 ppm/°C

Overvoltage Protection

240 Vrms

Overcurrent Protection

50 mA Max. at 110 VDC/VAC Max.

Common Voltage Protection

±200 VDC

Overcurrent Protection

Yes, 50 mA at 110 VDC

Virtual Channel to Channel Isolation

Yes, 400 VDC

Open Wire Detection for 4 ~ 20 mA

Yes

Input Impedance

Voltage

2 MΩ

Current

125 Ω

Common Mode Rejection

86 dB Min.

Normal Mode Rejection

100 dB

Analog Output

Channels

4

Type

+0 VDC to +5 VDC, ±5 VDC, +0 VDC to +10 VDC,±10 VDC, +0 mA to +20 mA, +4 mA to +20 mA (Jumper Selectable)

Resolution

12-bit

Accuracy

±0.1% of FSR

Voltage Output Capability

20 mA @ 10 V

Current Load Resistance

400 Ω

Open Wire Detection

Yes, for 4 to 20 mA only

Customers who bought this item also purchased the following items.


Related Products