8-channel Analog Input with High Voltage Protection and 4-channel Isolated Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP.  MiniOS7 Operating System.

WISE-7119

8-channel Analog Input with High Voltage Protection and 4-channel Isolated Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. MiniOS7 Operating System.

Features

***This Product Has Been Phased Out, You Can Find A Suitable Replacement in WISE-7118Z or WISE-7118Z/S2***

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7119 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7119 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7119 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel differential analog inputs and 4-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240 Vrms high over voltage protection.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting
  • Built-in IF-THEN-ELSE rule engine for logic operation
  • No more programming. Just click and get done!
  • Support IO, Counter, Timer, Email operations
  • Modbus/TCP Protocol for SCADA Software Seamless Integration
  • IEEE 802.3af-compliant Power over Ethernet (PoE)
  • 10/100 Base-TX Ethernet
  • Support Current Input, Voltage Input and Thermocouple Input
  • Over Voltage Protection is up to 240 Vrms
  • 4-channel Digital Outputs
  • 2-way Isolation/ESD Protection

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Specifications

Analog Input
Input Channels 8 (Differential)
Input Type(jumper selectable) +/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V
Thermocouple (J, K, T, E, R, S, B, N, C, L, M,LDIN43710)
+/-20mA, 0~20mA, 4~20mA
Resolution 16-bit
Sampling Rate 10 samples/Sec. total
Accuracy +/-0.1% or better
Zero Drift +/-10 μV/°C
Span Drift +/-25 ppm/°C
Input Impedance Voltage >1 MΩ
Current 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Over Voltage Protection 240 Vrms
Individual Channel Configuration Yes
Open Wire Detection Yes
Digital Output
Output Channels 4
Output Type Isolated Open Collector (Sink)
Max. Load Current 700 mA/Channel
Load Voltage 5 VDC ~ 50 VDC
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
System
CPU 16-bit CPU
SRAM 512 KB
Flash Memory 512 KB
EEPROM 16 KB
Watchdog Yes
Communication
PoE Ethernet Port 10/100 Base-TX and automatic MDI/MDI-X
2 Way Isolation
I/O 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each terminal and 8 kV Air for random point
EFT (IEC 61000-4-4) +/-4 kV for Power 
LED Indicators
PoE PoE On
L1 System Running
L2 Ethernet Link/Act
L3 Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection Yes
Powered from terminal block Yes, 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class1
Consumption 3.4 W
Mechanical
Dimensions(W x L x H ) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environment
Operating Temperature -25°C ~ +75 °C
Storage Temperature -30°C ~ +80 °C
Relative Humidity 10 ~ 90% RH, non-condensing

Software Specifications

Functions
Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions
48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers Delay / Timing functions.
12 Emails Send Email messages to pre-set Email receivers.
12 CGI Commands Send pre-set CGI commands.
12 Recipes Set up THEN/ELSE action groups.
8 P2P remote modules Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
AI Channel =, >, <, >=, <=(value)
Internal Register
DO Counter =, >, <, >=, <=(value), Change
Timer Timeout, Not Timeout
P2P DI, AI, DI counter, DO counter, IR
Rule Status Enable, Disable
THEN / ELSE Actions
DO Channel ON, OFF, Pulse Output
Internal Register Change the value
DO Counter Reset
Timer Start, Stop
Email Send
CGI Commands
Recipe Execute
P2P DO(On/Off), AO, IR
Rule Status Enable, Disable

Related Products


ICP DAS USA,Inc.