WF-2572
Industrial Ethernet to Wi-Fi Bridge. Fully compatible with IEEE 802.11 a/b/g. Supports WPA-PSK, WPA2-PSK for Wi-Fi encryption and supports -25C ~ +75C operating temperature.
Features
The WF-2572 is an Industrial Ethernet to Wi-Fi Bridge. The device only needs to connect the Ethernet cable with WF-2572 that can create an IEEE 802.11 a/b/g wireless personal network. The interface between Ethernet and Wi-Fi use transparent transmission so that it can convert Wi-Fi to wire internet without complex settings. The WF-2572 also supports dual bands (2.4/5 GHz). The 2.4 GHz is more crowded than 5 GHz. Therefore, the devices on 2.4 GHz suffer much more interference than the ones on 5 GHz. The WF-2572 will have less interference on 5 GHz.
- Frequency: 2.4/5 GHz
- Full compatible with IEEE 802.11 a/b/g
- Support Wi-Fi Limit-AP and Infrastructure mode
- Support WPA-PSK, WPA2-PSK for Wi-Fi encryption
- Plug-and-Play Ethernet to Wi-Fi connectivity
- USB-based configuration
- No driver installation required
- Built-in Watchdog
- Extended operating temperature range (-25°C ~ +75°C)

Specifications
Wi-Fi Interface
Antenna
Omni-Directional
3 dBi @ 2.4 GHz
5.5 dBi @ 5 GHz
Standard Supported
IEEE 802.11b/g
Frequency
2.4 GHz: CH1~11
5 GHz: CH36,40,44,48
Operation Mode
Limit-AP / Infrastructure
Encryption
Open/ WPA/ WPA2
Transmission Range
50 meters (LOS)
Ethernet Interface
Controller
100 Base-TX Ethernet Controller (Auto-MDIX)
Connector
RJ-45 with LED indicator
USB Interface
Type
USB 2.0 Full-Speed
Connector
USB type B
LED Indicators
System Status
3 Indicator LEDs (PWR, LINK, COMM)
Signal Strength
3 Indicator LEDs (High, Mid, Low)
Power
Input Voltage Range
10V ~ 30V
Power Consumption
1.6W
Mechanical
Casing
Plastic
Installation
DIN-Rail
Dimensions
33mm x 95mm x 120mm (W x L x H)
Environmental
Operating Temperature
-25℃ ~ +75 ℃
Storage Temperature
-30℃ ~ +80℃
Humidity
10 ~ 90%