ISaGRAF PAC with display and keypad (MiniOS7 inside). IP65 Compliant Front Panel.

VP-2117

ISaGRAF PAC with display and keypad (MiniOS7 inside). IP65 Compliant Front Panel.

  Price:  $1,229.00  

Features

ViewPAC series VP-2117 is the ISaGRAF PAC with graphic display and keypad. It is equipped with an 80186 CPU (16-bit and 80 MHz) running a MiniOS7 operating system, 3 I/O slots, a STN LCD, a rubber keypad and various connectivity including Ethernet and RS-232/485.

The ViewPAC - VP-2117 supports ISaGRAF Ver. 3 Workbench:
  • IEC 61131-3 Standard Open PLC Programming Languages (LD, FBD, SFC, ST, IL, FC) + Flow Chart (FC)
  • Auto-Scan I/O
  • On-Line Debugging/Control/Monitoring, Off-Line Simulation
  • Simple Graphic HMI


Its operating system, MiniOS7, can boot up in a very short time (0.4 ~ 0.8 seconds). It has a built-in hardware diagnostic function, and supports the full range of functions required to access all high profile I-8K and I-87K series I/O modules, such as DI, DO, DI/DO, AI, AO, Counter/Frequency, motion control modules, etc. Users can also choose RS-485 Remote I/O modules (I-7000 series) or expansion units (RU-87Pn or I-87Kn) plugged with high profile I-87K serial I/O modules.

Compared with traditional HMI + PLC solutions, ViewPAC reduces overall system cost, space and gives you all the best features of HMIs and PLCs.

Software Features

  • MiniOS7 Embedded Operating System (DOS-like)
  • ISaGRAF Ver.3 SoftLogic Inside
  • Support IEC 61131-3 Standard
  • Supports Graphic and Keypad functions
  • Accepts max. 64 KB ISaGRAF code size

Hardware Features

  • 80186 CPU (16-bit & 80 MHz)
  • 768 KB SRAM & 512 KB Flash
  • IP65 Compliant Front Panel
  • Rubber Keypad
  • STN LCD with English and Chinese Fonts
  • 3 I/O Expansion Slots (support High Profile I/O Modules)
  • 64 MB NAND Flash for Data Storage
  • 10/100M Ethernet Port
  • 3 Serial Ports (RS-232, RS-485)

Applications

a

Stress Monitoring Application of Constructions

a

ISaGRAF PAC connects the Smart Meter

a

ZigBee Wireless Solution

Integrate with CAN/CANopen Devices and Sensors SMS: Short Message Service
Send Email with One Attached File Motion Control
An Easy Way to Program the Fast FRnet Remote I/O Modules Data Recorder and Data Logger
Data Acquisition Auto-Report System Data Exchange: Fbus or Ebus
Modbus RTU/TCP Slave Ports Detect Hot-Swap I-87K (High Profile) I/O Status
Modbus RTU/ASCII Master Ports VIP Communication Security
Remote I/O Modules and Expansion module/board  

Specifications

Models VP-2117 VP-2117-TC
System Software  
OS MiniOS7
Development Software  
ISaGRAF Software ISaGRAF Version 3 : IEC 61131-3 standard. Languages: LD, ST, FBD, SFC, IL & FC
Max. Code Size Accepts max. 64 KB ISaGRAF code size (Appli.x8m must < 64 KB)
Power Supply  
Input Range +10 ~ +30 VDC
Isolated 1 kV
Capacity 3 A, 5 V supply to I/O expansion slots
Power Consumption 6 W (0.25 A @ 24 VDC)
General Environment  
Temperature Operating: -15 ~ +55 °C,
Storage : -30 ~ +80 °C
Humidity 10 ~ 90 % RH (non-condensing)
System  
CPU 80186 (80 MHz and 16-bit) or compatible
Watchdog Timers Yes (0.8 second)
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
SRAM 768 KB
Dual Battery Backup SRAM 512 KB (for 5 years data retention while power off)
FLASH 512 KB (100,000 erase/write cycles)
FLASH Disk 64 MB NAND Flash (100,000 erase/write cycles)
NVRAM 31 bytes (battery backup, data valid up to 5 year)
EEPROM 16 KB, Data retention: 40 years. 1,000,000 erase/write cycles
Serial Number Yes,64-bit hardware unique serial number
Communication Interface
Ethernet RJ-45*1,   10/100 Base-TX,   (Auto-negotiating, LED indicators), program download port.
COM0 Internal communication with the I-87K High Profile modules in slot 0 ~ 2
COM1 RS-232: TxD, RxD, GND, Speed: 115200 bps max. Program downloads port.
COM2 RS-485 (D+, D- ); Speed: 115200 bps max. ; 2500 VDC isolated
COM3 RS-232/RS-485
RS-232:TxD,RxD,GND,CTS,RTS ;  RS-485: DATA+,DATA-, 
Speed: 115200 bps max. Program downloads port.
I/O Expansion Slots  
Slot Number VP-2117: 3 slots (slot 0 ~ slot 2)
* Accept only High Profile I-8K Parallel & High Profile I-87K Serial I/O boards
Hot Swap * For High Profile I-87K I/O modules in slot 0 ~ 2 only
Data Bus 8/16 Bits
Address Bus Range 2 K for each slot
MMI (Man Machine Interface)
LCD Type and Size STN, 128x64 Dot Matrix LCD
Text Font English + Simplified Chinese English + Traditional Chinese
Display Mode Text + Graphics
Rubber Keypad 24 keys
Buzzer Yes
LED Indicators 3 Dual-Color LEDs (PWR, RUN, LAN1, L1, L2, L3; L1 ~ L3 for User Programmable)
Mechanical  
Dimensions (W x L x H) 182 mm x 158 mm x 125 mm
Ingress Protection Front panel: IP65
Motion  
Motion Control one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control.
PWM Output  
High Speed PWM Module I-8088W: 
8-ch PWM outputs, software support 1 Hz ~ 100 KHz (non-continuous), duty: 0.1 ~ 99.9%
DO Module as PWM 8-ch. max. 500 Hz max. For Off=2 & On=2 ms . Output square wave: Off: 2 ~ 32766 ms, On: 2 ~ 32766 ms.
Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W. (Relay Output boards cannot generate fast square wave)
Counter, Encoder, Frequency
Parallel DI Counter 8-ch. max. For 1 controller. Counter val: 32-bit. 500 Hz max. Min. ON & OFF width must > 2 ms. Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
Serial DI Counter Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W.
Remote DI Counter All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535
High Speed Counter I-87082W: 100 kHz max. 32 bit; 
I-8084W: 250 kHz max. 32 bit
Encoder I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for 
              pulse/direction and cw/ccw input mode.
I-8084W: 250 kHz max., 4-ch encoder, can be pulse/direction, or Up/Down or A/B phase 
              (Quad. mode); Not support Encoder Z-index.
Frequency I-87082W: 2-ch, 1 Hz ~ 100 kHz; 
I-8084W: 8-ch, 1 Hz ~ 250 kHz;
Protocols  
Modbus RTU/ASCII Master
Protocol
Up to 2 COM Ports (COM1 ~ 3 and COM5 if multi-serial port boards are plugged in)can support Modbus RTU Master or ASCII Master protocol to connect to other Modbus Slave devices, 2 ports support up to 128 Modbus_xxx function blocks (same type).
Modbus RTU Slave 
Protocol
Up to 2 COM PortsCOM1 and one of (COM2, COM3) can support Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & MMI panels.
Modbus TCP/IP Slave 
Protocol
Support Modbus TCP/IP Slave protocol for connecting ISaGRAF & PC/HMI. (Max. 6 connections)
Remote I/O One of COM2, 3 supports I-7000 I/O modules & (I-87K base or RU-87P1/2/4/8) + I-87K High Profile I/O cards as Remote I/O. Max. 64 Remote I/O module for one controller
Fbus Built-in COM3 Port to exchange data between ICP DAS's ISaGRAF PACs.
Ebus To exchange data between ICP DAS's ISaGRAF Ethernet PACs via Ethernet port.
SMS:
Short Message Service
One of COM3 or (COM5 in multi serial port board) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user's cellular phone. Optional GSM/GPRS modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)
User-defined Protocol User can write his own protocol applied at COM1 ~ COM3 (& COM5 ~ COM16 if multi-serial port boards are plugged) by serial communication function blocks.
CAN/CANopen Up to 3 COM Port. User can use its COM1, 3, or (COM5 ~ COM12, resides at the I-8112iW/8114W/
8114iW RS-232 expansion board) to connect one I-7530 (RS-232 to CAN converter) to support CAN/CANopen devices and sensors. One VP-2117 supports max. 3 RS-232 Ports to connect max. 3 
I-7530.
FRnet I/O Support Max. 3 I-8172W FRnet Master cards to connect FRnet I/O modules. (Max. 768-ch. DI + 768-ch. DO)
Sending E-mail Actively or passively sending E-mail via Ethernet port through internet. Max.10 receivers for each sending and can send E-mail with an attached file. (Max. file size is about 488 KB)

Demo Files

Project Name Description I/O Boards Or Complex Equipment Used
Demo_01 To output at a time interval: SYSDAT_R, SYSDAT_W, SYSTIM_R, SYSTIM_W (ST+QLD)  
Demo_02 To do something at some sec later when an event happens I-8055
Demo_03 Convert float value to string, using real_str & rea_str2  
Demo_04 PID control, refer to CD:napdosisgrafwinconenglish_manu"PID_AL..  
Demo_05 Store & backup boolean & long integer value To/From EEPROM  
Demo_06 Retain variable by Retain_b, Retain_N, Retain_f, Retain_t  
Demo_07 Receive String coming from remote PC or controller via UDP/IP udp_ip
Demo_08 Using "com_MRTU" to disable/enable Modbus RTU slave port,  
Demo_09 PWM I/O demo. (Pulse Width Modulation), minimum scale is 1ms for VP-2xx7 I-8055
Demo_10 Send Time String to COM3:RS232 every second by using COMOPEN, COMSTR_W  
Demo_11 Send string to COM2 when alarm 1 to 8 happens, slot 1: i8077 Slot 1: I-8077
Demo_12 Read Real Val from Modbus RTU device mbus
Demo_13 Write Real Val to Modbus RTU device mbus
Demo_14 Using Modbus function code 6 to write 16 bits mbus
Demo_15 COM3 connecting 1: M7053D + 2: M7045D (MBRTU format, baud=9600) mbus
M-7053D
M-7045D
Demo_16 COM3 connecting 1: M-7053D to get D/I counter value (MBRTU format, baud=9600) mbus
M-7053D
Demo_17 COM3 connecting 1: M7017R + 2: M7024 (MBRTU format, baud=9600) mbus
M-7053D
M-7024
Demo_18 COM3 connecting 1: M7017RC , Current input, +/- 20 mA, 4-20 mA (Modbus format) mbus
M-7017RC
Demo_19 COM3 connecting 1: M-7019R (set as T/C K-type input) (MBRTU format, baud=9600) mbus
M-7019R
Demo_20 COM3 connecting 1: M7080 (MBRTU format, baud=9600) mbus
M-7080
Demo_21 test Msg_F. i8xx7 since 3.19. i7188EG/XG since 2.17 & 2.15. W-8xx7 since 3.36  
Demo_22 test Msg_N. i8xx7 since 3.19. i7188EG/XG since 2.17 & 2.15. W-8xx7 since 3.36  
Demo_23 Auto-report data to PC via UDP.Controller=10.0.0.103, PC=10.0.0.91 udp_ip
bus7000b
Demo_24 Send email via Ethernet port. (To one receiver without attached file)  
Demo_25 VP-2xx7 : Record 1~4 Ch. voltage every 50ms and draw trend curve by M.S.Excel I-8024
I-8017h
s256_512
Push4Key, 
Show3Led
Demo_26 Send UDP Str to PC when alarm trigered(variable array), Time_Gap is 1 sec I-8077
udp_ip
Demo_26a Send UDP Str to PC 3 sec later when alarm (variable array), Time_Gap is 250ms I-8077
udp_ip
Demo_27 For VP-2117. Send email to a receiver with an attached file  
Demo_28 Get driver version of VP-2xx7  
Demo_29 Display a string to VP2000 starting at (X_, Y_) on the LCD lcd_init
Demo_30 Display a Traditional Chinese to VP2000-TC starting at (X_, Y_) on the LCD lcd_init

Related Products


ICP DAS USA,Inc.