PROFIBUS Remote I/O Module with 8 Isolated Digital Inputs and 4 Digital Outputs

PROFI-5060

PROFIBUS Remote I/O Module with 8 Isolated Digital Inputs and 4 Digital Outputs

  Price:  $399.00  

Features

The PROFI-5060 is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8-channel isolated digital input and 4-channel relay output. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.

The PROFI-5060 is one of the PROFIBUS DP series products produced by ICP DAS. It provides the PROFIBUS DP communication protocol with any DP-Masters. The PROFI-5060 provides ±4KV ESD protection contacting for all terminals (include I/O Terminals and PROFIBUS connector). By applying the PROFI-5060, users can easily establish a PROFIBUS DP network with other DP-Masters. In advance, it can be used in the application of building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc..

  • Support for PROFIBUS DP-V0 protocol
  • Detect transmission rate automatically(Max. 12Mbps)
  • Address 0~99 set by rotary switches
  • Network Isolation Protection
  • 3000VDC isolation protection on PROFIBUS side
  • 4KV ESD Protection (contact for any terminal)
  • Wide range of power input (DC 10~40 VDC) and operating temperature (-25°C~+75°C)

profi-5060

Applications

  • Industrial Automation
  • Factory Automation
  • Process Automation
  • Etc…

Applications

Features

Protocol & Hierarchy

DP-V0 Slave

Supports Transmission Rate (kbps)

9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000

Transmission Rate Setting

detected automatically

Address Setting

0~99 set by rotary switches

Indicators

PWR and RUN LEDs

I/O modules Configuration

Configured by GSD file

Network Isolation Protection

High Speed iCoupler

DC Isolation Protection

3000 VDC on PROFIBUS side

4KV ESD Protection

Contact for each terminal

Specifications

Hardware
ESD Protection
4 kV class A
PROFIBUS Interface
Controller
Profichip VPCLS2
Transceiver
ADI ADM2486
Connector
9-pin female D-Sub
Baud Rate (bps)
9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m)
Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation
3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol
DP-V0
LED
Round LED
PWR LED, RUN LED
Power
Power supply
Unregulated +10 ~ +40 VDC
Protection
Reverse polarity protection, Over-voltage brown-out protection
Power Consumption
1 W
I/O
Digital Output
4 Channels (Form C )
Contact Rating: 0.6A@125VAC, 2A@30VDC
Operating Time: 3ms. Release Time: 2ms. (Typical)
Minimum Life: 500,000 Ops.
Digital Input
8 Channels (Sink or Source), Isolated from each other
Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V
Input Impedance: 3KΩ in series with opto-coupler
Isolation Voltage: 3750Vrms
Mechanism
Installation
DIN-Rail
Dimensions
91 mm x 128 mm x 52 mm (W x L x H)
Environment
Operating Temp.
-25°C ~ 75°C (-13°F ~ +167°F)
Storage Temp.
-30°C ~ +85°C (-22°F ~ +185°F)
Humidity
5 ~ 95% RH, non-condensing

Related Products


ICP DAS USA,Inc.