ZB-2060-T
Zigbee Wireless 6-ch Isolated Digital Input and 4-ch Relay Output Module, Modbus RTU, communication distance up to 100 meters. Supports operating temperatures from -25°C ~ +75°C
References & Support
Features
*** The ZB series has been phased out and replaced with the Zigbee Alliance product ZT-2060***
The ZB-2060-T/ZB-2060-PA offers 4 Form A power relay output channels and 6 digital input channels, each of which features photocouple isolation. In addition, you can choose sink-type or source-type input via wire connections. All channels are able to be used as 16-bit counters. The ZB-2060-T/ZB-2060- PA has 10 LED indicators to display the channel status, and has 4 kV ESD protection and 3000 VDC intra-module isolation. Users can easily configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
- Wireless Transmission Range up to 700 m (PA-Version)
- Wireless Transmission Range up to 100 m (T-Version)
- GUI Configuration Software (Windows Version)
- 6 Digital Input Channels and 4 Relay Output Channels
- Supports 16-bit Counters for Digital Input Channels
- Surge and ESD Protection
- DIN-Rail Mountable
Applications
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Specifications
Models | ZB-2060-T | ZB-2060-PA | |
Digital Input | |||
Input Channels | 6 | ||
Input Types | Isolated, Wet Contact (Sink/Source) | ||
Input Level | On Voltage Level: +3.5 VDC ~ +30 VDC | ||
Off Voltage Level: +1 VDC Max. | |||
Input Impedance | 3 kΩ, 0.33 W | ||
Counters | Channels: 6 | ||
Max. Count: 16-bit (65535) | |||
Max. Input Frequency: 100 Hz | |||
Min. Pulse Width: 5 ms | |||
Relay Output | |||
Output Channels | 4 | ||
Output Types | Power Relay, Form A | ||
Contact Rating | 5 A @ (250 VAC/30 VDC) | ||
Max. Contact Voltage | 270 VAC/125 VDC | ||
Operate Time | 10 ms max. at Rated Voltage | ||
Release Time | 5 ms max. at Rated Voltage | ||
Endurance | Electrical | Resistive Load: 100,000 ops. min. (10 ops/minute) | |
Mechanical | At No Load: 20,000,000 ops. min. (300 ops/minute) | ||
Dielectric Strength |
Between Contacts | 750 VAC for 1 minute | |
Between Coil to Contacts |
3,000 VAC for 1 minute | ||
Insulation Resistance | 5,080 V (1.2/50 μs) | ||
Surge Strength | 5 ms Max. at rated voltage | ||
ESD Protection | +/-4 kV contact for each channel |
Models | ZB-2060-T | ZB-2060-PA |
Communication Interface | ||
Wireless Standards | ZigBee, IEEE 802.15.4 | |
Transmission Power | 4 dBm | 22 dBm |
2.4 GHz Antenna | 3 dBi Omni directional | 5 dBi Omni direction |
Transmission Range (LoS) | 100 m | 700 m (Typical) 1 km (Max.) |
Certification | CE/FCC, FCC ID | - |
Max. Slaves in a ZigBee Networ | 254 | |
ZB-100R/ZB-100T Support | Yes | |
Protocols | Supports DCON and Modbus RTU Protocols | |
Hot Swap | Rotary and DIP switch | |
LED Indicators | ||
Power | 1 LED, red | |
ZigBee Communication | 1 LED, green | |
Digital Input and Output | 10 LEDs, green | |
Power | ||
Power Consumption | 1.2 W Max. | |
Mechanical | ||
Flammability | Fire Retardant Materials (UL94-V0 Level) | |
Dimensions (W x L x H) | 33 mm x 87 mm x 107 mm | |
Installation | DIN-Rail | |
Environment | ||
Operating Temperature | -25 °C ~ +75 °C | |
Storage Temperature | -30 °C ~ +80 °C | |
Relative Humidity | 10 ~ 90% RH, Non-condensing |