Intelligent RS-232/CAN low speed fault tolerant converter. Supports operating temperatures between -25 to 75°C.

I-7530FT

Intelligent RS-232/CAN low speed fault tolerant converter. Supports operating temperatures between -25 to 75°C.

  Price:  $319.00  

Features

PM-213xCAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The following figure shows the application architecture for I-7530/I-7530-FT modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7530/I-7530-FT Converters. The programmable RS-232 device (For example: I-8411/I-8431/I-8811/I-8831/W-8031/W-8331/W-8731 embedded controller) can use the serial port to connect to the CAN network via the I-7530/I-7530-FT modules. In order to use the CAN network with traditional RS-232 devices, we provide a way to achieve this purpose. The I-7530/I-7530-FT are designed to unleash the power of CAN bus via RS-232 communication method. It accurately converts messages between CAN and RS-232 networks. This module let you to communicate with CAN devices easily from any PC or devices with RS-232 interface.

i7530FT application

I-7530 application

Moreover, we expand the functionalities of I-7530/I-7530-FT for some special application. In pair connection mode, I-7530/I-7530-FT can be used to connect PC with other RS-232 devices at the same time. The application architecture may be as follows.

I-7530 application 2

3000V isolation on CAN side (only I-7530) 
The CAN port of I-7530 is an isolated with 3000V isolation. This isolation can protect the local RS-232 devices from the damage signal coming from CAN network. 

Watchdog inside
The watchdog is a hardware reset circuit to monitor the operation status. When working in harsh or noisy environment, the I-7530/I-7530-FT may shut down by the external signal. The circuit may let the I-7530/I-7530-FT to work continuously and never halt.

Power and Error indicator display
There are two indicators on the I-7530/I-7530-FT.The power indicator can help user to check whether the I-7530/I-7530-FT is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7530/I-7530-FT. 

Applications

• Control System • Building Automation • Factory Automation • Distributed data acquisition 
I-7530 Applications

Features

  • Compatible with CAN specification 2.0A and 2.0B
  • Fully compatible with ISO 11898-2 standard (for I-7530)
  • Fully compatible with ISO 11898-3 standard (low speed fault tolerance) (for I-7530-FT)
  • Support various bauds from 10K bps to 1M bps
  • Jumper for 120 Ω terminator resistor (for I-7530)
  • Software configurable CAN and RS-232 communication parameters
  • Power, data flow and error indicator for CAN and RS-232
  • Watchdog inside
  • Support transparent communication mode
  • 1000 frames in CAN received buffer and 900 frames in RS-232 received buffer

Software Utility Features

  • CAN bus Baud rate configuration
  • CAN acceptance filter configuration
  • CAN 2.0A or 2.0B specific selection
  • RS-232 Baud rate and data bit setting
  • RS-232 responded selection
  • Easy test to transmit/receive can messages
  • Setting for I-7530 communication mode (normal mode or pair connection mode)

CAN Monitor & Datalog Tool

  • It has a CAN message field which can display the receiving CAN messages in Decimal or HEX mode.
  • Can display the timestamp of each received CAN message.
  • Users can change the display mode, up-down, down-up or stop.
  • It can count the number of received CAN messages.
  • Data Log : It can save the CAN message as “ txt ” file.
  • Has CAN ID filter function.
  • Can send CAN message to CAN BUS according the defined interval time.

CAN Monitor

Virtual CAN

There are various communication interfaces among the CAN devices like PCI CAN board, Ethernet series and RS-232 series CAN module. According to different purpose of users’ projects, the users maybe need to choice different CAN products. Because of this situation, the programmer should develop different communication program to handle different CAN device. For example, the user should develop “Socket Client” to communicate with I-7540. When using I-7530, the users need “UART” technique to communicate with it. Nowadays, ICP DAS develop the Virtual CAN technique. The Virtual CAN driver is the excellent tool for users. It transforms whole CAN devices into Virtual CAN port. And then it generates Virtual CAN port like “VxCAN 1” or “VxCAN 2”. The users could send and receive CAN message by appointing the Virtual CAN port number. The users don't need to care about what kind of CAN device which is used.

Virtual CAN

Performance Test

The test is the performance which transfer 8 bytes data frame from CAN to RS232. (for I-7530)
CAN setting
Transfer frames
Transfer time(ms)
RS-232 setting
Receive frames
Receive time (ms)
The max frames/sec
Data<8 byes/frme
RS232 command length
2.0A 1Mbps
1,000
200
115200,n,8,1
1,000
2954
338
>=338
22 B
2.0A 1Mbps
1,000
200
115200,n,7,1
1,000
2775
360
>=360
22 B
2.0B 1Mbps
1,000
200
115200,n,8,1
1,000
3580
279
>=279
27 B
2.0B 1Mbps
1,000
200
115200,n,7,1
1,000
3337
299
>=299
27 B

The test is the performance which transfer 8 bytes data frame from RS232 to CAN. (for I-7530)
CAN setting
Transfer frames
Transfer time (ms)
RS-232 setting
Receive frames
Receive time (ms)
The max frames/sec
Data<8 byes/frame
RS232 command length
2.0A 1Mbps
1,000,000
2,612,243
115200,n,8,1
1,000,000
2,612,243
382
>=382
22 B
2.0A 1Mbps
1,000,000
2,441,130
115200,n,7,1
1,000,000
2,441,130
409
>=409
22 B
2.0B 1Mbps
1,000,000
3,142,043
115200,n,8,1
1,000,000
3,142,043
318
>=318
27 B
2.0B 1Mbps
1,000,000
3,142,043
115200,n,7,1
1,000,000
2,966,646
337
>=337
27 B

Specifications

Item
I-7530
I-7530-FT
CAN Interface
Controller
Microprocessor inside with 20MHz
Transceiver
NXP 82C250
AMIS 41682
Channel number
1
Connector
9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Baud Rate (bps)
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
10 k, 20 k, 50 k, 125 kbps
Isolation
3000 VDC for DC-to-DC, 
2500 Vrms for photo-couple
NONE
Terminator Resistor
Selectable 120Ω terminator resistor by jumper
1 kΩ for CAN_H and CAN_L
Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
ISO-11898-3 (low speed fault tolerance), CAN 2.0A and CAN 2.0B
Receive Buffer
1000 data frames
RS-232 Interface
Connector
9-pin female D-Sub (TxD, RxD, GND, N/A for others )
Baud Rate (bps)
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
Data bit
5, 6, 7, 8
Stop bit
1, 2
Parity bit
None, Even, Odd
Receive Buffer
900 data frames
LED
Round LED
ON LED: Power and Data Flow; ERR LED: Error Status
Power
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
1 W
Mechanism
Installation
DIN-Rail
Dimensions
118mm x 72mm x 33mm
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-40 ~ 80 ℃
Humidity
5 ~ 95% RH, non-condensing

Related Products


ICP DAS USA,Inc.