ISaGRAF IEC-61131 ViewPAC Programmable Touch Screen Controller with 3 I/O Slots, Windows CE.NET 5.0 inside and 5.7" Touch Screen display. Programmable in Ladder Logic, Structured Text, C#, C++, VB.NET and more. Ingress Protection - Front panel: IP65.
ViewPAC combines a PAC (Programmable Automation Controller), color graphic touch screen display and keypad in one unit (PAC + HMI). It is a touch screen controller that equips a PXA270 CPU (520 MHz) running a Windows CE .NET 5.0 operating system, variant connectivity (USB, Ethernet, RS-232/485), 3 I/O slots, 3.5”/5.7” TFT LCD and a rubber keypad. Its operating system, Windows CE .NET 5.0, has many advantages including hard real-time capability, small core size, fast boot speed, interrupt handling at a deeper level and deterministic control. Running Windows CE .NET 5.0 in the ViewPAC provides the ability to run ISaGRAF and PC-based control software such as Visual Basic .NET, Visual C#, Visual C++, SCADA software…. etc.
|eLogger HMI Application|
ICP DAS eLogger is an easy and useful HMI development tool which helps user to create user-friendly pictures and control items.
|Modbus TCP/IP Master|
|Rich I/O Expansion Ability
There are several kinds of communication interfaces (Ethernet, RS-232/485, USB ports, CAN bus, FRnet, GSM/GPRS, ZigBee) to expand I/O modules and connect external devices.
|ZigBee Wireless Solution
ISaGRAF PAC plus ZB-2550P and ZB-2551P (ZigBee to RS-232/485 Converters) can add wireless communications, reduce the wiring costs, and accomplish remote I/O control and data acquisition.
|GPS Applications: ISaGRAF PAC plus I-87211W
VP-25W7/23W7 can support one I-87211W in its slot 0 ~ 2 or as RS-485 remote I/O.
|Structure Stress Monitoring Application
ICP DAS releases effective VW sensor solution (Vibration Wire solution). It is useful for measuring the stress of structures like buildings, bridges, and dams..
|Integrate with CAN/CANopen Devices and Sensors
VP-25W7/23W7 supports maximum of ten I-7530 (RS-232 to CAN) Converters.
|Send Email with One Attached File|
|Data Acquisition and Auto-Report System
The VP-2xW7 can use UDP/IP Client protocol to auto-report acquisition data & control data to local or to remote Internet PC/Server.
|Modbus RTU/TCP Slave Ports
Modbus RTU (RS-232/485/422): max. 5 Modbus RTU Slave ports. Modbus TCP/IP: max. 32 PC/HMI/SCADA connections.
|Modbus RTU/ASCII Master Ports
Modbus RTU/ASCII (RS-232/485/422): max. 10 Modbus RTU/ASCII Master ports.
|Remote I/O Modules
There are about 100 choices of Local I/O ( I-8K, I-87K ) and Remote I/O modules ( I-7000, M-7000 and RU-87P1/2/4/8 + I-87K High Profile cards ). Auto-Configuration - Configurations of I-87K I/O modules can be pre-configured and stored in the nonvolatile memory of the RU-87Pn. Easy Duplicate System- Using the DCON Utility, you can easily make a backup of the I-87K module configurations and write to another RU-87Pn.
| FRnet I/O
Fast I/O scan: About 3 ms per FRnet scan. (This depends on your ISaGRAF PLC program's scan time, if the ISaGRAF PLC scan time is 8 ms, then the scan time for all will be 8 ms, instead of 3 ms.) The max. I/O channel number can be 3 x 256 = 768 Ch. of Digital Inputs plus 768 Ch. of Digital Outputs (if all 3 slots are plug-in I-8172W).
|New Hot-Swap and Redundant System
Plug one I-8135W and enable the 2nd Ethernet port of VP-25W7/23W7. If one Ethernet cable of VP-25W7/23W7 is broken or damaged, the other one will still work. If one controller is damage, the other one will take over the control of the RS-485 I/O. PC/HMI can connect to this redundant system by one or two active IP.
The Web HMI is a free software mechanism coming with some ICP DAS’s PAC (Programmable Automation Controller). The Web HMI offers functions that you could monitor or control the local or remote controller via the Internet Explorer running on your PC.
|SMS: Short Message Service
The ISaGRAF PACs can integrate with a GSM Modem to support SMS: Short Message Service. This allows user to request information or perform control tasks for the ISaGRAF PAC via his personal cellular phone. In addition, the controller can also send information and alarms to user's cellular phone.
Data, date & time can be stored on the Flash Disk or a microSD card. A PC can load the data via FTP or Web HMI.
|Communicate with Other TCP/IP Server Devices or UDP Devices|
Reference & Support
|OS||Windows CE 5.0|
|.NET Compact Framework||2.0|
|Embedded Service||FTP Server, Web Server|
|ISaGRAF Software||ISaGRAF Version 3 : IEC 61131-3 standard. Languages: LD, ST, FBD, SFC, IL & FC|
|Max. Code Size||Accepts max. 1 MB ISaGRAF code size (Appli.x8m must < 1 MB)|
|Non-ISaGRAF||Options: Microsoft EVC++4.0 or VS .NET 2003/2005/2008 (VB .NET 2003/2005/2008, C# .NET 2003/2005/2008)|
|Web HMI||Supports Web HMI function, PC running Internet Explorer can access VP-2xW7 via Local Ethernet or Internet or dial Modem, monitoring and control.|
|Security||Web HMI supports three levels user name and password protection|
|Input Range||+10 ~ +30 VDC (unregulated)|
|Capacity||2.5 A, 5 V supply to I/O expansion slots|
|Consumption||7.2W (0.3A @ 24VDC)|
|Temperature||Operating: -20°C ~ +70°C ,
Storage : -30°C ~ +80°C
|Humidity||5 ~ 95 % RH (non-condensing )|
|CPU||CPU: PXA270, 32-bit and 520 MHz or compatible|
|Dual Watchdog Timers||Yes|
|RTC (Real Time Clock)||Provide seconds, minutes, hours, day of week/month, month and year, valid from 1980 to 2079|
|Dual Battery Backup SRAM||512 KB (for 5 years data retention while power off)|
|FLASH||96 MB (64 MB for OS image, 31 MB for built-in Flash disk, 1 MB for registry)|
|Expansion Flash Memory||microSD socket with 1 GB microSD card (can support up to 16 GB compatible microSDHC card)|
|EEPROM||16 KB, Data retention: 40 years. 1,000,000 erase/write cycles|
|Rotary Switch||Yes (0~9)|
|NET ID||From 1 ~ 255, User-assigned by software|
|Serial Number||Yes,64-bit hardware unique serial number|
|First Ethernet||RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
Please use NS-205/NS-208 Industrial Ethernet Switch.
|Second Ethernet||The default VP-25W7/VP-23W7 has only one Ethernet port. They can add one optional I-8135W card in its slot 0 ~ 2 to expands the second Ethernet port.|
|USB Port||one USB 1.1 Host ports for USB mouse, keyboard or USB drive|
|COM0||Internal communication with the I-87K High Profile modules in slots|
|COM2||RS-485 (D2+, D2- ; self-tuner ASIC inside); Speed: 115200 bps max. ; 2500 VDC isolated|
|COM3||RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND);
Non-Isolated; Speed: 115200 bps max.
|Slot Number||VP-25W7/VP-23W7: 3 slots (slot 0 ~ slot 2)|
|Accept only High Profile I-8K Parallel & High Profile I-87K Serial I/O boards|
|Hot Swap (will be available)||For High Profile I-87K I/O modules in slot 0 to slot 2 only|
|MMI (Man Machine Interface)|
|LCD Monitor||3.5” TFT (Resolution 320 x 240)||5.7” TFT (Resolution 640 x 480)|
|Rubber Keypad||24 keys||6 keys|
|Audio||Microphone-In and Earphone-Out|
|LED Indicators||3 Dual-Color LEDs (PWR, RUN, LAN1, L1, L2, L3; L1~L3 For User Programmable)|
|Dimensions (W x L x H)||182 mm x 158 mm x 125 mm|
|Ingress Protection||Front panel: IP65|
|Motion Control||One I-8091W (2-axis) or two I-8091W (4-axis) can do motion control, only one I-8091W can do X-Y dependent motion.|
|High Speed PWM Module||I-8088W, 8-ch PWM outputs, 10Hz ~ 500 KHz (non-continuous), duty: 0.1 ~ 99.9%|
|DO Module as PWM||8-ch. max. 250 Hz max. For Off=2 & On=2 ms . Output square curve: Off: 2 ~ 32766 ms, On: 2 ~ 32766 ms. Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W (Relay Output boards cannot generate fast square pulse)|
|Counter, Encoder, Frequency|
|Parallel DI Counter||8-ch. max. For 1 controller. Counter val: 32-bit. 250 Hz max. Min. ON & OFF width must > 2 ms. Optional DI boards:
I-8040W, 8040PW, 8042W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
|Serial DI Counter||Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W.
|Remote DI Counter||All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535|
|High Speed Counter||I-8084W : 250 kHz max. 32 bit; I-87082W: 100 kHz max. 32 bit; I-87088W : 500 kHz max. 32 bit|
|Encoder||I-8084W: 250 kHz max. , 4-ch encoder, can be dir/pulse, or up/down or A/B phase (Quard. mode)
* Not support Encoder Z-index
|Frequency||I-87082W: 2-ch, 1 Hz ~ 100 kHz; I-87088W: 8-ch, 0.1 Hz ~ 500 kHz; I-8084W: 8-ch, 1 Hz ~ 250 kHz;|
|Modbus RTU/ASCII Master
|Up to 10 COM Ports (COM2~ 3 and COM5~COM14 if multi-serial port boards are plugged in) can support multi-ports of Modbus RTU/ASCII Master protocol to connect to other Modbus Slave devices.|
|Modbus RTU Slave Protocol||Up to 5 COM Ports (one of COM2/3 and COM5 ~ COM8) can support Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & HMI panels.|
|Modbus TCP/IP Slave Protocol||Ethernet Ports all support Modbus TCP/IP Slave protocol for connecting ISaGRAF & PC/HMI. LAN1 and optional 2nd Ethernet Port in I-8135W support total up to 32 connections. When one Ethernet port is broken, the other one can still connect to PC/HMI.|
|Web HMI Protocol||Ethernet ports for connecting PC running Internet Explorer.|
|I-7000 & I-87K RS-485
|One of COM2, COM3 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards and RU-87P1/2/4/8 + I-87K High Profile I/O boards as Remote I/O. Max. 255 pcs. of I-7000/87K Remote I/O modules for one controller.|
|M-7000 Series Modbus I/O||Max. 10 RS-485 ports (COM2~3 & COM5~COM14 if multi-serial port boards are plugged in) can support M-7000 series Modbus I/O. Each port can connect up to 32 M-7000 Modules. (with optional I-7510 repeater connected can connect up to more than 32 M-7000 Modules)|
|Modbus TCP/IP I/O||Supports ICP DAS Ethernet I/O. If LAN1 is broken, it will switch to the 2nd Ethernet port (in optional I-8135W card) automatically to continuously work. (This need LAN1 & the 2nd Ethernet’s IP are set in the same IP domain)|
|FRnet I/O||Support max 3 pcs. I-8172W boards in slot 0 to 2 to connect to FRnet I/O modules, like FR-2053, FR-2057 FR-32R, FR-32P, at www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (English) FAQ-048. Each I-8172w board can connect up to 256 DI plus 256 DO channels.|
|Send Email||Supports mail_snd and mail_set functions to send email with one attached file via Ethernet port.|
|Ebus||To exchange data between ICP DAS’s ISaGRAF Ethernet controllers via Ethernet port. (LAN1 Port only)|
|SMS: Short Message Service||One of COM3 (or COM5 if multi-serial port board is plugged in) can link to a GSM Modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user’s cellular phone. Optional GSM Modems: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)|
|User-defined Protocol||User can write his own protocol applied at COM2~COM3 & COM5~COM14(if multi-serial port boards are plugged in) by Serial communication function blocks.|
|Modem_Link||No support Modem_Link.|
|MMICON/LCD||COM3 or COM5(if I-8112W/8114W is found) supports ICP DAS's MMICON. The MMICON is featured with a 240 x 64 dot LCD & a 4 x 4 Keyboard to display picture, string, integer, float, & input a char, string, integer & float.|
|UDP Server & UDP Client
(Exchange Message &
|LAN1 or 2nd Ethernet port (in optional I-8135W card) support UDP Server and UDP/IP Client protocol to send/receive message to/from PC/HMI or other devices. For example, to automatically report data to InduSoft's RXTX driver.|
(Exchange Message &
|LAN1 or 2nd Ethernet port (in optional I-8135W card) support TCP Client protocol to send/receive message to/from PC/HMI or other devices which support TCP Server protocol. For example, to automatically report data to InduSoft ‘s RXTX driver, or to connect a location camera.|
|New Hot-Swap and Redundant System||Must enable the 2nd Ethernet port in the optional I-8135W card. This redundant system has setup two “Active IP” address point to the active VP-25W7/VP-23W7 's LAN1 and 2nd Ethernet ports always. One or two or more PC / HMI / SCADA can communicate with this redundant system via one of the two given active IP. So the PC / HMI / SCADA can access to the system easily without any notice about which VP-25W7/VP-23W7 is currently active. Moreover, the new redundant system can integrate with the RU-87P4 and RU-87P8 expansion unit plus the I-87K high-profile I/O cards to support the hot-swap application. If the I/O card is damaged, the maintenance person just takes one good-card with same model number to hot-swap the damaged one without stopping this redundant system. Please refer to www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (English) FAQ-093.|
|CAN/CANopen||VP-25W7/VP-23W7 can use its COM3 or COM5~COM14 resides at the I-8112iW/8114W/8114iW RS-232 expansion board to connect one I-7530 : the RS-232 to CAN converter to support CAN and CANopen devices and sensors. One VP-25W7/VP-23W7 supports max. Ten RS-232 ports to connect max. Ten I-7530. Please refer to www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (English) FAQ-086.|
4-channel 14-bit Analog output module with current and voltage outputs. Output types includ...
Unmanaged 5-Port Industrial Ethernet Switch with Din Rail Mount. Each port supports 10/100 M...
24V / 1.7A 40.8W Power Supply
8 Channel Universal Analog Input Data Acquisition Current Input, Voltage Input, or Thermocou...
10/20 Channel Analog Input Data Acquisition Module with High Voltage Protection. Supports an...