> Data Acquisition > PCI / ISA Data Acquisition Boards > PCI Data Acquisition Boards > PCI Digital I/O Boards > PIO-D56

PIO-D56

write a review write a review

PCI Bus 56-Bit DIO Board

References & Support

Features

This product has been phased out and replaced with the PIO-D56U

The PIO-D56 provides 24-bit bi-direction digital I/O and 16-bit digital inputs and 16-bit digital outputs. The 24-bit bi-direction digital I/O use 37-pin D-sub connector. The 16-bit digital I/O uses a 20-pin header.

PCI bus
Up to 24 channels of digital I/O
All I/O lines buffered on the board
Eight-bit groups independently selectable for I/O on 24-bit port
Input / Output programmable I/O ports under software control
Double side SMD, short card
Connects directly to:
- DB-24PR
- DB-24PD
- DB-24RD
- DB-24PRD
- DB-16P8R
- DB-24POR
- DB-24SSR
- DB-24C
- or any OPTO-22 Compatible daughter boards
4 interrupt sources:
- PC0
- PC1
- PC2
- PC3
One DB37 connector
Two 20-pin headers (only for PIO-D56)
High driving capability
Automatically detected by windows 95/98/NT
No base address or IRQ switches to set
DIO response time is about 0.77 us (1.3 MHz max.)
Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab

Specifications

All inputs are TTL compatible
Logic high voltage: 2.4V ( Min. )
Logic low voltage: 0.8V ( Max. )
All outputs are TTL compatible
OPTO-22 outpur (CON3)
- Sink current : 64mA (Max.)
- Source current : 32mA(Max.)
16-channel output (CON1)
Sink current : 8mA (Max.)
Source current : 0.4mA(Max.)
Power Consumption:
- +5V @ 530mA/420mA(PIO-D56/PIO-D24)
Operating Temperature: 0°C to 60°C
Storage Temperature: -20°C to 80°C
Humidity: 0% to 90% non-condensing
Dimensions: 143mm x 105mm

References and Support

Customer Reviews (0)

Be the first to leave a review.