Embedded Controller, programmable in ISaGRAF IEC-1131 Development Suite with 40 Mhz CPU. Supports operating temperatures between -25 to 75°C.
The I-7188XG is an embedded controller and powered by an 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. It provides one serial RS-232/RS-485 port(Jumper Selectable) and one RS-485 port. The I-7188XG also supports an optional battery back-up SRAM expansion board and Flash-Rom board, providing non-volatile mass storage from 2 megabytes to 64 megabytes.
Creating a modbus Link with the I-7188XG
I/O Expansion Boards
Linking the I-7000 & I-87xx module for remote I/Os
Linking To An MMI Interface Device
MMICON: ICP DAS's Man Machine Interface
Reference & Support
|Power requirements||10 to 30VDC (unregulated) , I-7188XG:2W, I-7188XGD:3W|
|Protection||Built-in power protection & network protection circuit|
|temperature||Operating: -25°C to +75°C|
|Storage : -30°C to +85°C|
|Humidity||5 to 95% (non-condensed)|
|CPU||80188 40MHz, or compatible|
|Real time clock||Gives hour, minute, sec, date of week, date of month, month & year (1980 to 2079)|
|FLASH Memory||512K bytes, Erase unit is 64K bytes, 100,000 erase/write cycles|
|NVSRAM||31 bytes, battery backup, data valid up to 10 years|
|EEPROM||2048 bytes, retention > 100 years. 1,000,000 erase/write cycles|
|Disply for I-7188EGD||Five 7-Seg. Led on the front. lt can display message & value.|
|Expansion I/O bus||One optional Xxxx series I/O board can be plugged inside the I-7188XG / 7188XGD|
|NET ID||Set by software, 1 to 255|
|COM1||Can be used as RS232 or RS485, Speed: 115200 bps max.
RS-485:D+, D-, self-tuner inside
Program download prot.
|COM2||RS485: D+, D-, 115200 bps max. Self-tuner ASIC inside, Program download port.|
|ISaGRAF Version 3||IEC61131-3 standard. Languages: LD, ST, FBD, SFC, IL & FC|
|Pulse Width Modulation output||All Xxxx series D/O boards support PWM output. 8 channels max. for one controller.
500Hz max. for Off=1 & On=1 ms
Output square curve: Off: 1 to 32767 ms, On: 1 to 32767 ms
|Parallel D/I counter||All Xxxx series D/I support D/I counter.
8 ch. max. for one controller. Counter value: 32 bit
500HZ max. Min. pulse width > 1ms
|Remote D/I counter||All remote I-7000 & I-87K D/I modules support counters. 100Hz max. value: 0 to 65535|
|Remote High speed counter||Optional i-87082:100kHz max. , 32 bit|
|Modbus serial protocol||COM1 default supports Modbus RTU slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & MMI panels.|
|Remote I/O||One of COM2 (or COM3:RS485 if found) supports I-7000 I/O modules & (I-87K base + I-87K serial I/O boards) as remote I/O. Max. 64 I/O module for one controller|
|Modbus master protocol||One of COM2 (or COM3 if found) supports Modbus master protocol to connect to other Modbus slave I/O devices|
|Fbus||built in COM2 port to exchange data between ICP DAS's ISaGRAF controllers.|
|SMS:Short Message Servise||One of (COM3:RS232 or COM4:RS232 if found) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user's cellular phone.
Optional GSM modems: M1206 or GM29 (GSM 900/1800)
|User defined protocol||User can write his own protocol applied at COM2 & (COM3 to COM8 if found) by serial communication function blocks.|
|MMICON / LCD||One of (COM3:RS232 if fonnd) supports ICP DAS's MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float.|
|Redundant Bus7000||Two ISaGRAF controllers can link to remote I-7000 & I-87K I/O modules at the same time. Only one controller is active to control these remote I/Os. If one is dead, the other one will take over the control of remote I/Os.|
|Battery backup SRAM||I-7188XG / 7188XGD can support up to 1024 retain variables with a X607 / X608 plug in the only expansion I/O slot.
Data can be stored in X607/X608, and then PC can load these data via COM1.
PC can also download pre-defined data to the X607/X608.
Optional: X607: 128kbytes, X608: 512kbytes
|Mount:||Din Rail Mount|
The I-3625-ENC IP66 industrial enclosure is designed for use in industrial environments. It ...
24V / 1A 24W Power Supply with Din Rail Mount. Supports a voltage input range between 100-2...
24V / 1.7A 40.8W Power Supply
24V / 0.2A 4.8W Power Supply
Small Industrial Enclosure with dimensions 10 inches (width) x 7.09 inches (length) x 3.54 i...