PM-3033-MTCP

The ICP DAS PM-3033-MTCP is a three phase smart power meter that communicates over Modbus TCP for energy monitoring and analysis. It allows users to have real time access to their power consumption by providing power measurements. It supports 10-500V, 1A or 5A and 50/60Hz. The PM-3033-MTCP not only supports low voltage on the primary side of the power monitoring system but also the medium/high voltage on the secondary side. Based on the success of our previous smart power meters, this new PM-3033-MTCP no longer uses dedicated CT's, which helps users lower their implementation costs. Users can take direct input from the “secondary side 1A/5A” type CT's. It operates over a wide voltages input range of 10 ~ 500 VAC to ensure worldwide voltage compatibility. It supports Modbus TCP for easy integration with other I/O and SCADA system.

• True RMS Power Measurement
• Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
• Direct input of secondary side 1A/5A CT
• Voltage Measurements Up to 500 V
• W Accuracy Better than 0.5% (PF=1)
• Supports Ethernet communication interface
• Supports Modbus TCP protocol
• Total Harmonic Distortion (THD)
• IEC 61010-1 and EN 61010-1

• User's Manual
• Data Sheet
• Software