PISO-813/S
32 Channel Single-Ended Isolated Analog Input Board with toolkits for LabView, Windows DOS/95/98/NT/200/XP and OCX. Linux and Dasylab drivers are provided. Includes CA-4002 D-Sub connector
References & Support
Features
*** This product has been phased out and replaced with the PISO-813U/S***
The PISO-813 is a bus-type isolated 12-bit A/D board for IBM or compatible PCs with PCI bus. It features 10KHz data acquisition under DOS and Windows. The PISO-813 provides 32 single-ended analog inputs. The isolation range of PISO-813 is increased to 3000 V. It is the most cost effective isolated A/D board for the PCI Bus in the world. The PISO-813 has one 37-pin D-sub connector . It can be installed in a 5V PCI slot and can support true “Plug & Play “.
- PCI Bus
- 32 single-ended analog input channels
- 12-bit A/D converter ( ADS 774 or equivalent)
- 3,000Vdc photo-isolation protection
- Analog input range
- Bipolar: ±10V,±5 V, ±2.5V, ±1.25V, ±0.625V
- Unipolar: 0-10V, 0-5V, 0-2.5V, 0-1.25V
- Programmable gain control
- 3000Vdc/DC converter built-in
- A/D trigger mode: Software Trigger
- A/D data transfer mode: polling
- Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab
- Applications:
- High speed data acquisition system
- Harsh environment operation
- Signal isolation
Specifications
Analog Input | ||
Isolation Voltage | 3750 Vrms (Bus Type) | |
Channels | 32 single-ended | |
A/D Converter | 12-bit, 8 μs Conversion time | |
Sampling Rate | 10 kS/s. max. | |
FIFO Size | N/A | |
Over voltage Protection | Continuous +/-35 Vp-p | |
Input Impedance | 10 MΩ/6 pF | |
Trigger Modes | Software | |
Data Transfer | Polling | |
Accuracy | 0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V | |
Zero Drift | +/- 25 ppm/°C of FSR | |
General | ||
Bus Type | 5 V PCI, 32-bit, 33 MHz | |
Data Bus | 8-bit | |
Card ID | No | |
I/O Connector | Female DB37 x 1 | |
Dimensions (L x W x D) | 180 mm x 105 mm x 22 mm | |
Power Consumption | 850 mA @ +5 V | |
Operating Temperature | 0 ~ 60 °C | |
Storage Temperature | -20 ~ 70 °C | |
Humidity | 5 ~ 85% RH, non-condensing |
Analog Input Range | |||||
Model | PISO-813 | ||||
Gain | 1 | 2 | 4 | 8 | 16 |
Bipolar | +/-10 V +/-5 V |
+/-5 V +/- 2.5 V |
+/-2.5 V +/-1.25 V |
+/-1.25 V +/-0.625 V |
+/- 0.625 V |
Unipolar | 0 ~ 10 V | 0 ~ 5 V | 0 ~ 2.5 V | 0 ~ 1.25 V | 0 ~ 0.625 V |
Sampling Rate Max. | 10 kS/s. max. | 10 kS/s. max. | 10 kS/s. max. | 10 kS/s. max. | 10 kS/s. max. |