PIR-130-AC
Passive Infrared (PIR) 360° Motion and Temperature Sensor Module. DCON and RS-485 Modbus RTU protocol. 110~220 VAC with operating temperature range of -25°C ~ +75°C (-13°F ~ +167°). DCON and Modbus RTU Protocol with RS-485 interface
Features
The PIR-130-AC module has a 1-channel passive infrared (PIR) sensor that detects human-body generated infrared waves within a range of approximately 8 meters in diameter with a 360° coverage area. The PIR-130-AC is for indoor motion detection and can be configured to automatically switch on a light if motion is detected. It also includes a 1-channel temperature sensor that can measure room temperature or be configured to activate a fire alarm.
The device has an RS-485 interface and runs on DCON and Modbus RTU protocols.
- 360° Motion Detection Up to 8 meter Diameter Range
- Time-Delay / Lux. / Sensitivity Adjustable
- Photo Sensor Inside for Smart Switch-on Control
- LED Indicator for PIR/Temperater Sensor
- The Temperature Sensor for Measuring Room Temperature or Fire Alarm
- Relay Output Can be Used to Control the Light Via the PIR/Temperature Sensor
- Up to 1500 W Incandescent and 300 W Fluorescent (T8) Loading Capability
- RS-485 Communication Interface
- DCON and Modbus RTU Protocols
- Ceiling Surface Mount Design
Specifications
| CPU Module | |
| Time-delay | Hardware: 8-step Switch-selectable (seconds): 6, 16, 33, 66, 131, 262, 524, 1049 Software: 16-step (seconds): 2, 4, 6, 8, 16, 33, 49, 66, 131, 262, 393, 524, 1049, 2097, 3146, 4194 |
| LUX Control Level | Hardware: 2 mode (Dawn and dust) / Software: 5-step |
| Detection Range | Distance: 4 meters Max. |
| Detection Field of View | 360° Diameter 8 meters Max. |
| Temperature Sensor | |
| Measurement Range | -25°C ~ +100°C (-13°F ~ 212°F) |
| Fire Alarm | 65°C (Programmable) |
| Resolution | 0.0625°C |
| Accuracy | ±2°C |
| Relay Output | |
| Channel | 1 |
| Type | Power Relay, Form C |
| Max. Load Current | NO: 10 A @ 250 VAC NC: 6 A @ 250 VAC |
| Load Wattage | Incandescent Bulb: 1500 W Max.; Fluorescent Lamp 300 W Max. |
| RS-485 Interface | |
| COM Port | RS-485 |
| Transmission Distance (m) | Dependent on Baud Rate. For example, 1200 m Max. at 9600 bps. |
| Baud Rate (bps) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
| Protocol | DCON, Modbus RTU |
| Node Address | Hardware: 160 ~ 191 / Software: 1 ~ 255 |
| LED Indicators | |
| LED Indicators | Yes,1 as Power/Communication Indicator. 1 as Alarm Indicator. |
| EMS Protection | |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal, ±8 kV Air for Random Point |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| Power Requirments | |
| Power Supply | 110 ~ 220 VAC |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 2 W |
| Mechanical | |
| Installation | Ceiling mounting |
| Protection Class | IP20 |
| Dimension (D x H) | Ø 121 mm x 52 mm |
| Environmental | |
| Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) |
| Storage Temperature | -30°C ~ +80°C (-22°F ~ +176°F) |
| Humidity | 10 to 90% RH, Non-condensing |
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
PIR-130-AC
Passive Infrared (PIR) 360° Motion and Temperature Sensor Module. DCON and RS-485 Modbus RTU protocol. 110~220 VAC with operating temperature range of -25°C ~ +75°C (-13°F ~ +167°). DCON and Modbus RTU Protocol with RS-485 interface
$189.00 Each
Quantity added: