> Data Acquisition > PCI / ISA Data Acquisition Boards > PCI Data Acquisition Boards > PCI Digital I/O Boards > PIO-D24

PCI Bus 24-Bit DIO Board. Replacement product for DIO-24.

PIO-D24

PCI Bus 24-Bit DIO Board. Replacement product for DIO-24.

References & Support

Features

PIO-D24 has been phased out and replaced by the PIO-D24U.

The PIO-D24 provides 24 TTL digital I/O lines. The PIO-D24 consists of three 8-bit bi-directional ports. The 8-bit ports are named port A (PA), port B (PB), and port C (PC). All ports are configured as inputs upon power-up or reset. The PIO-D24 has one D-Sub connector. It can be installed in a 5V PCI bus and can support true "Plug & Play".

PCI bus
Up to 24 channels of digital I/O
All I/O lines buffered on the board
Eight-bit groups independently selectable for I/O on 24-bit port
Input / Output programmable I/O ports under software control
Double side SMD, short card
Connects directly to:
- DB-24PR
- DB-24PD
- DB-24RD
- DB-24PRD
- DB-16P8R
- DB-24POR
- DB-24SSR
- DB-24C
- or any OPTO-22 Compatible daughter boards
4 interrupt sources:
- PC0
- PC1
- PC2
- PC3
One DB37 connector
High driving capability
Automatically detected by windows 95/98/NT
No base address or IRQ switches to set
DIO response time is about 0.77 us (1.3 MHz max.)
Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab

Specifications

All inputs are TTL compatible
Logic high voltage: 2.4V ( Min. )
Logic low voltage: 0.8V ( Max. )
All outputs are TTL compatible
OPTO-22 outpur (CON3)
- Sink current : 64mA (Max.)
- Source current : 32mA(Max.)
16-channel output (CON1)
Sink current : 8mA (Max.)
Source current : 0.4mA(Max.)
Power Consumption:
- +5V @ 530mA/420mA(PIO-D56/PIO-D24)
Operating Temperature: 0°C to 60°C
Storage Temperature: -20°C to 80°C
Humidity: 0% to 90% non-condensing
Dimensions: 143mm x 105mm