Power-over-Ethernet (PoE) allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation.
The PET-7067 feature true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable). The PET-7067 can receive power from an auxiliary power sources like AC adapters and battery in addition to the PoE enabled network. This is a desirable feature when the total system power requirements exceed the PSE's load capacity. Furthermore, with the auxiliary power option, the PET-7060 can be used in a standard Ethernet (non-PoE) system.
The PET-7067, a web-based PoE Ethernet I/O module, features a built-in web server, which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Besides, with the web HMI function, no more programming or HTML skills are needed; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The PET-7067 offers easily and safely access for users from anytime and anywhere! In addition, the PET-7067 also supports Modbus/TCP protocol that makes perfect integration for PET-7067 to SCADA software.
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- Built-in Web Server
- Modbus/TCP Protocol
- Communication Security
- 2-way Isolation/ESD Protection
- Built-in Dual Watchdog
- 10/100 Base-TX Ethernet
- I/O Pair Connection
- DO Type: 8 Power Relay (Form A)
Reference & Support
|Built-In Web Server||Yes|
|I/O Pair Connection||Yes|
|Ethernet Port||1 x RJ-45, 10/100 Base-TX|
|Security||ID, Password and IP Filter|
|Dual Watchdog||Yes, Module (0.8 second), Communication (Programmable)|
|for System Running||Yes|
|for Ethernet Link/Act||Yes|
|for DI/DO status||-|
|for PoE Power||Yes|
|2 Way Isolation|
|ESD (IEC 61000-4-2)||±4 kV Contact for Each Terminal and ±8 kV Air for Random Point|
|EFT (IEC 61000-4-4)||±2 kV for Power Line|
|Surge (IEC 61000-4-5)||±0.5 kV for Power Line|
|Reverse Polarity Protection||Yes|
|Powered from Terminal Block||12 ~ 48 VDC|
|Powered PoE||Yes, IEEE 802.3af, Class1|
|Consumption||3.3 W (Max.)|
|Dimensions (W x L x H)||72 mm x 123 mm x 35 mm|
|Required Supply Voltage||DIN-Rail or Wall mounting|
|Operating Temperature||-25°C ~ +75°C (-13°F ~ +167°F)|
|Storage Temperature||-30°C ~ +80°C (-22°F ~ +176°F)|
|Relative Humidity||10 ~ 90% RH, Non-condensing|
|Type||Power Relay, Form A (SPST N.O.)|
|Contact Rating||5 A @ 250 VAC/24 VDC (Resistive Load)|
|Min. Contact Load||10 mA @ 5 V|
|Operating Time||10 ms (max.)|
|Release Time||5 ms (max.)|
|Mechanical Endurance||2 × 10^7 ops|
|Electrical Endurance||10^5 ops.|
|Power-on Value||Yes, Programmable|
|Safe Value||Yes, Programmable|
Modbus TCP based Eth...
48V , 0.52A, 25 W Po...
Small Industrial Enc...
Unmanaged 5-Port Ind...
5-port Industrial Un...