Power over Ethernet (PoE) allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives
through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up
The PET-7065 feature true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable).
The PET-7065 can receives power from an auxiliary power sources like AC adapters and battery in addition to the PoE enabled network. This is a desirable
feature when the total system power requirements exceed the PSE's load capacity. Furthermore, with the auxiliary power option, the PET-7060 can be used
in a standard Ethernet (non-PoE) system.
The PET-7065, a web-based PoE Ethernet I/O module, features a built-in web server, which allows configuration, I/O monitoring and I/O control by simply
using a regular web browser. Besides, with the web HMI function, no more programming or HTML skills are needed; creating dynamic and attractive web
pages for I/O monitoring and I/O control would be fun to engineers ever after. The PET-7065 offers easily and safely access for users from anytime and
anywhere! In addition, the PET-7065 also supports Modbus TCP protocol that makes perfect integration for PET-7065 to SCADA software.
The PET-7065 provides 6 Photo-MOS Relay(Form A) output and 6 isolated wet contact (sink, source type) digital input channels. Each Photo-MOS relay
supports contact rating as 1A@60Vac or 1A@60Vdc and each digital input channel supports counter input (32 bits and 500Hz max.).
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis, Testing Equipment.
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- Built-in Web Server
- Modbus TCP Protocol
- Communication Security
- 2-way Isolation/ESD Protection
- Built-in Dual Watchdog
- 10/100 Base-TX Ethernet
- I/O Pair Connection
- DO Type: 6 PhotoMOS Relay (Form A)
- DI Type: 6 Wet Contact (Sink, Source)
Reference & Support
|Built-In Web Server||Yes|
|I/O Pair Connection||Yes|
|Ethernet Port||10/100 Base-TX with Auto MDI/MDI-X|
|Protocol||Modbus TCP, Modbus UDP|
|Security||ID, Password and IP Filter|
|Dual Watchdog||Yes, Module (0.8 second), Communication (Programmable)|
|L1 (System Running)||Yes|
|L2 (Ethernet Link/Act)||Yes|
|L3 (Ethernet 10/100 M Speed)||Yes|
|2 Way Isolation|
|ESD (IEC 61000-4-2)||4 kV Contact for Each Terminal and 8 kV Air for Random Point|
|EFT (IEC 61000-4-4)||+/-4 kV for Power|
|Reverse Polarity Protection||Yes|
|Powered from Terminal Block||Yes, 12 ~ 48 VDC|
|Powered from PoE||Yes, IEEE 802.3af, Class1|
|Consumption||3.0 W (Max.)|
|Dimensions (W x L x H)||72 mm x 123 mm x 35 mm|
|Installation||DIN-Rail or Wall mounting|
|Operating Temperature||-25°C ~ +75°C (-13°F ~ +167°F)|
|Storage Temperature||-30°C ~ +80°C (-22°F ~ +176°F)|
|Humidity||10 ~ 90% RH, non-condensing|
|On Voltage Level||+10 VDC ~ +50 VDC|
|Off Voltage Level||+4 VDC Max.|
|Input Impedence||10 kΩ|
|Counters||Max. Count||4,294,967,285 (32 bits)|
|Max. Input Frequency||500 Hz|
|Min. Pulse Width||1 ms|
|Overvoltage Protection||+70 VDC|
|Type||PhotoMOS Relay, Form A|
|Load Voltage||60 VDC/VAC|
|Max. Load Current||60 VDC/VAC|
|60V/0.8A (Operating Temperature +40 ~ +60°C)|
|60V/0.7A (Operating Temperature +60 ~ +75°C)|
|Operating Time||1.3 ms (Typical)|
|Release Time||0.1 ms (Typical)|
|Power-on Value||Yes, Programmable|
|Safe Value||Yes, Programmable|
8-channel Isolated S...
6-channel Data Acqui...
Modbus TCP based Eth...
7-channel RTD Input ...