Download Now

Enter your information or login to view the document.


×
Outdoor Access Point and Router (Wireless Router and Access Point with Rugged Housing for Outdoor Applications). Supports operating temperatures from –20°C to +65°C

P-380A

Outdoor Access Point and Router (Wireless Router and Access Point with Rugged Housing for Outdoor Applications). Supports operating temperatures from –20°C to +65°C

    Item Not Available  


No documentation or manuals for this item.

Features

P-380A has been phased out. Click here for other Industrial Ethernet product details.

The P-380 Outdoor Access Point & Router is ideal for rough environments and outdoor applications. It can be configured as an inter-building wireless bridge or router as well as an access point for wireless clients.

  • Routing
    • Connecting two buildings via a wireless link is the job of a wireless router. A router can connect different networks (subnets) and minimizes the data transfer over the wireless link. One P-380 can connect up to eight different networks in a point-to-multipoint configuration.
  • Bridging
    • When protocols other than TCP/IP need to be transmitted, the P-380 can be configured as a layer 2 bridge. With no license required for wireless bridges in the 2.4 GHz band, in almost every part of the world, the P-380 can be a cost effective alternative to leased-lines for line-of-sight connections.
  • Access Point
    • The P-380 can also be a Wi-Fi access point for environmentally challenged locations like industrial plants, or when an outdoor installation can better serve the application. The weatherproof housing has a NEMA classification of IP66, and incorporates a temperature control system to support operation from -20o to +65oC.
  • No On-Site-Maintenance Needed
    • A bright LED display of signal strength enables simple installation optimization. A Power over Ethernet client, the P-380 is supplied data and power over one cable, allowing remote power resets, thereby eliminating the need for any on-site-maintenance.
  • Long range
    • The P-380 can be ordered with an integrated high-gain antenna (P-380A), or with a connector (reverse N) for an external antenna (P-380N). With the integrated 10dBi directional antenna (40o beam width) two P-380A routers can connect at a distance of up to five kilometers.
  • Remote Management
    • The P-380 supports many different network management interfaces, such as SNMP, Telenet or HTTPS. It has an integrated site survey feature, provides performance measurement data and firmware upgrades can be done remotely.

IEEE 802.11b and Wi-Fi compliant WLAN Access Point Mode, Bridge Mode or Station Mode (configurable). Has weather proof and rugged housing. Operating temperature ranges from –20°C to +65°C. Integrated or external antennas WEP 64/128-bit support, Layer 2 isolation Remote management Remote software upgrades Power-over-Ethernet support Wall or mast mount .

Access Point and Router

Specifications

  • IEEE 802.11b Access Point, Router, Bridge
  • Wi-Fi compliant
  • 40/128-bit WEP security
  • Layer 2 isolation for security
  • 802.1x/EAPoLAN/with MD-5/TLS/TTLS/SIM support (in preparation)
  • IAPP roaming (in preparation)
  • RADIUS AAA client with EAP support (in preparation)
  • Remote management via HTTPs, Telnet, SNMP (MIB II, Ethernet MIB, Bridge MIB, private MIB
  • IP routing with NAT, port forwarding and firewall filters
  • Remote software upgrade via HTTP
  • Integrated Site Survey, Loop-back test
  • DHCP server, DHCP client
  • Access Control List (MAC address filter)
  • Programmable output power
  • Interface
    • 10/100 Base-T, RJ-45 Power-over-Ethernet port for connection to Power-Switch
  • Wireless
    • Standard: IEEE 802.11b DSSS (2.4GHz ISM radio banc)
    • Data Rate: 11Mbps, 5.5Mbps, 1Mbps (Auto scaling)
    • Transmit Power: 29 dBm (typical)
    • Sensitivity
P-380A 
Data Rate Sensitivity  11Mbps  5.5Mbps  1Mbps 
 Sensitivity  -82dBm  -84dBm -90dBm
 Modulation CCK  CCK   DBPSK
  • Integrated Antenna: integrated 10dBi directional antenna, 45° beam width vertical and horizontal, vertical polarization
  • Physical Specification
    • Dimensions: 180mm x 160mm x 58mm (7.1 x 6.3 x 2.3in)
    • Weight: 1100g (includes mounting kit)
  • General Environment
    • Operating Temperature: -20°C to 65°C
    • Humidity: up to 95%
  • Power Supply
    • Type: external AC/DC converter 100/230V to 5V DC/1.5A, 3W max.
    • Power-over-Ethernet: IIEEE 802.3af compliant
  • Mechanical Specification
    • Ruggedized and flame-resistant plastic housing, wall or mast mount
  • LEDS
    • 3 + 10 LEDS
      • RF activity
      • LAN activity
      • Power
      • 10 LED link quality display
  • Management
  • Interfaces:
    • HTTPs
    • Telnet
    • SSH
    • SNMP (MIB II, Ethernet MIB, Bridge MIBprivate MIB)
    • Terminal Software Update:
      • Remote Software Update via HTTPs
      • Test: Integrated site survey
      • Loop-back test
      • Reset: Remote reset / Manufacturing reset
  • Warranty
    • 2 year (limited)
  • Package Contents
    • P-380A Outdoor Access Point & Router
    • Power supply and cables (single-port PoE Host)
    • CD-ROM with software and documentation
    • Mounting kit

References and Support

No documentation or manuals for this item.

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left