Features
- 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
- Up to 30 watts per PoE port at 24~57 VDC Power Input
- Supports operating temperatures from -40°C ~ +75°C
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Power input 12~57 VDC wide range redundant power inputs
- Broadcast Storm protection
- Automatic MDI/MDI-X crossover for plug-and-play
- DIN-Rail Mounting, Wall Mounting (optional)
Introduction
The NSM-206PSE is 6-port unmanaged Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-206PSE enable centralization of the power supply, providing up to 30 watts. The NSM-206PSE can be used to power IEEE 802.3af/at standard devices (PD).
Specifications
LED Indicators | |
Status | PWR1, PWR2, POE, Link/Act, Speed |
Ethernet | |
Ports | 6 x RJ-45, 10/100Base-TX |
Standards | IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
Processing Type | Store & forward; wire speed switching |
MAC Addresses | 2048 |
Frame Buffer Memory | 768 Kbit |
Isolation | 1500 Vrms 1 minute |
DIP Switch | Broadcast Storm protection |
PoE Technology | |
PoE Compliance | 100% IEEE 802.3at complian |
PoE Power | Up to 30 watts per channel |
PoE Operation | Automatic detection and power management |
PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) |
PoE Disconnect Mode | DC disconnect |
PoE Voltage | +52 VDC |
Power | |
Reverse Polarity Protection | Yes |
Input Range | 12 ~ 57 VDC Redundant dual Input |
Redundant Power Inputs | Yes |
Consumption | 0.125 A @ 12 VDC without PD loading, 6.2A @ 24VDC with PD full loading (15.4W per ports) 0.15 A @ 24 VDC without PD loading, 5.8A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDCwithout PD loading, 2.9A @ 48VDC with PD full loading (30W per ports) |
Mechanical | |
Casing | Metal |
Dimensions (mm) | 28 x 160 x 120 (W x L x H) |
Installation | DIN-Rail or Wall Mounting (with optional kit) |
Environmental | |
Operating Temperature | -40 ~ +75°C |
Storage Temperature | -40 ~ +85°C |
Humidity | 10 ~ 90% RH, Non-condensing |