Single-mode 30 Km, SC Connector, 4-Port 10/100 Mbps with 2 Fiber ports Switch, metal case, Supports Input Voltage Range of 12 to 48VDC, has an SC connector, operates up to 75C

NSM-206AFCS-T

Single-mode 30 Km, SC Connector, 4-Port 10/100 Mbps with 2 Fiber ports Switch, metal case, Supports Input Voltage Range of 12 to 48VDC, has an SC connector, operates up to 75C

  Price:  $899.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.
ADD TO CART
ADD TO CART
BUY BY 1-CLICK

References & Support


Features

Daisy Chain

Fiber Daisy Chain Configuration

The NS-206AF/NSM-206AF is a 4-port unmanaged Ethernet with 2 fi ber port switch. Using fi ber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions. The NS-206AF/NSM-206AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

  • Provides 6 x 100-FX fi ber port plus 4 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • DIN-Rail
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Store-and-forward architecture
  • Redundant dual +12 ~ 48 VDC power inputs
  • Supports operating temperatures from -30 ~ +75°C

Redundant Power Input for NS-206AF/NSM-206AF series

Both power inputs can be connected simultaneously to live DC power sources. If one power source fails, the other live source acts as a backup, and automatically supplies all of NS-205AF/NSM-205AF series power needs.

NSM-206AF Application

Pin Functions for Power Input

External power supply is connected using the removable terminal block:
PWR : Power input and should be connected to the power supply (+)
GND: Ground and should be connected to the power supply (-)
F.G. : F.G. stands for Frame Ground (protective ground). It is optional. If you use this pin, it can reduce EMI radiation; improve EMI performance and ESD protection.

Specifications

Models NS-206AF NSM-206AF
Technology
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, 10/100M
Ethernet Isolation 1500 Vrms 1 minute
+/- 4 kV ESD Protection Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode NS-206AFT-T/FC-T
NSM-206AFT-T/FC-T

Multi mode fiber cables: 50/125, 62.5/125 or 100/140 um
Distance: 2 km, (62.5/125 um recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 20 dBm
Max. TX Output: - 14 dBm
Max. RX Sensitivity: -32 dBm
Max. RX Overload: -8 dBm
Budget: 12 dBm

Single-Mode NS-206AFCS-T
NSM-206AFCS-T
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125, or 10/125um
Distance: 30 Km, (9/125 um recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 15 dBm
Max. TX Output - -8 dBm
Max. RX Sensitivity: -34 dBm
Max. RX Overload: -5 dBm
Budget: 19 dBm
Single-Mode NS-206AFCS-60T
NSM-206AFCS-60T
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 um
Distance: 60 Km, (9/125 um recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 5 dBm
Max. TX Output - 0 dBm
Max. RX Sensitivity: -35 dBm
Max. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range +12 ~ +48 Vdc (Redundant input)
Power consumption 0.14 A@ 24 Vdc
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connection 6-Pin Removable Terminal Block
Mechanical
Casing Plastic (Flammability UL 94V-0) Metal (IP30 Protection)
Dimensions (W x L x H) 31 mm x 157mm x 113mm 25 mm x 168 mm x 119 mm
Installation DIN-Rail
Environmental
Operating Temperature -30°C ~ +75°C
Storage Temperature -40°C ~ +85°C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left