NS-205PFCS-24
Single-mode 30 km, SC Connector, 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports and can be used as a power source equipments (PSE).
Features
The NS-205PFCS-24 is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; supporting 4 PoE ports which are classified as power source equipments (PSE). It provides up to 15.4 watts of power per PSE port. When fiber optics is used, it prevents noise from interfering with your system while supporting high-speed (100 Mbps) and high-distance (up to 60 km) transmissions. The NS-205PFCS-24 features a 24 VDC to 48 VDC boost for PoE application applying power supply when 48 VDC power supply is not available.
- Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Power Input, +46 ~ +55 V
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
- Automatic MDI/MDI-X crossover for plug-and-play
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from -30 ~ +75 °C
- DIN-Rail Mounting
Specifications
Models | NS-205PF-24V |
PoE | 802.3af |
Input Voltage Rangeg | +18 ~ 32 VDC |
Operating Temperature | -30 °C ~ +75 °C |
Casing | Plastic |
Installation | DIN-Rail Mounting |
Dimensions (W x H x D) (Unit: mm) |
31 x 157 x 113 |
Models | NS-205PF-24V Series | |
Technology | ||
Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) | |
Processing Type | Store & forward; wire speed switching | |
MAC Addresses | 1024 | |
Memory Bandwidth | 3.2 Gbps | |
Frame Buffer Memory | 512 Kbit | |
Flow Control | IEEE 802.3x flow control, back pressure flow control | |
Ethernet Interface | ||
RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | |
LED Indicators | Power, Link/Act, Power Device is detected | |
Ethernet Isolation | 1500 Vrms 1 minute | |
+/-4 kV ESD Protection | Yes | |
Fiber Interface (100 Base-FX; SC/ST type) | ||
Multi-Mode | NS-205PFT/FC NSM-205PFT/FC NS-205PFT-24V/FC-24V NSM-205PFT-24V/FC-24V |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm |
Single-Mode | NS-205PFCS NSM-205PFCS NS-205PFCS-24V/FCS-24V NSM-205PFCS-24V/FCS-24V |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 30 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Min. RX Overload: -5 dBm Budget: 19 dBm |
Single-Mode | NS-205PFCS-60 NSM-205PFCS-60 NS-205PFCS-60-24V/FCS-60-24V NSM-205PFCS-60-24V/FCS-60-24V |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 60 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -5 dBm Max. TX Output: 0 dBm Max. RX Sensitivity: -35 dBm Min. RX Overload: -5 dBm Budget: 30 dBm |
Power Input | ||
Input Voltage Range | +18 ~ +32 VDC | |
Power Consumption | 0.24 A @ 24 VDC without PD loading; 3.2 A @ 24 VDC with PD full loading; 4.6 A @ 18 VDC with PD full loading |
|
Protection | Power reverse polarity protection | |
+/-4 kV ESD Protection | Yes | |
Connector | 3-Pin Removable Terminal Block | |
PoE Technology | ||
PoE Compliance | 100% IEEE 802.3af compliant | |
PoE Classification | PSE (Power Sourcing Equipment) | |
PoE Voltage | +48 VDC depending on power input | |
PoE Voltage | Up to 15.4 watts per channel | |
PoE Operation | Automatic detection and power management | |
PoE Pin assignments | V+ (Pin 1,2), V- (Pin 3,6) | |
PoE disconnect mode | DC disconnect | |
Mechanical | ||
Casing | Plastic (Flammability UL 94V-0) |
|
Dimensions (W x L x H) (Unit: mm) | 31 x 157 x 113 | |
Installation | DIN-Rail Mounting | |
Environment | ||
Operating Temperature | -30 °C ~ +75 °C | |
Storage Temperature | -40 °C ~ +85 °C | |
Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |