4-port 10/100 Mbps Ethernet with 1 fiber port Switch (Single mode, SC connector), +12 VDC ~ +48 VDC

NS-205AFCS-T

4-port 10/100 Mbps Ethernet with 1 fiber port Switch (Single mode, SC connector), +12 VDC ~ +48 VDC

Features

  • Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Full duplex IEEE 802.3x
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Store-and-forward architecture
  • Redundant dual +12 ~ 48 VDC power inputs
  • Supports operating temperatures from -30 ~ +75°C
  • Single-mode, SC Connector Fiber supports
  • DIN-Rail Mounting

CE FCC RoHS WEEE

Introduction

The NS-205AFCS-T is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 15 km) transmissions. The NS-205AFCS-T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Reference & Support

Specifications

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact
LED Indicators
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ethernet
Ports 4 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control
Isolation 1500 Vrms 1 minute
Fiber
Ports 1 x 100 Base-FX, SC connector
Mode Single-Mode
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 µm
Distance 30 km, (9/125 µm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -15 dBm Min.
-8 dBm Max.
RX Sensitivity -34 dBm
RX Overload -5 dBm
Budget 19 dBm
Power
Reverse Polarity Protection Yes
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Alarm Contact Yes, Relay 2 A @ 30 VDC
Mechanical
Casing Plastic
Dimensions (mm) 31 x 157 x 123 (W x L x H)
Installation DIN-Rail Mounting
Environmental
Operating Temperature -30 ~ +75°C
Storage Temperature -40°C ~ +85°C
Humidity 10 ~ 90% RH, non-condensing

Customers who bought this item also purchased the following items.


Related Products